New Zealand (through Standards New Zealand) is a P (voting) member on ISO Technical Committee 43 (Acoustics) and its Sub Committees 1 (Noise) and 2 (Building acoustics).
This page lists the ISO standards under review, and lists the New Zealand Industry Reference Group (IRG) Members.
If you have comments or contributions on any of the Standards in the table below please contact the IRG members listed below. For any other queries about New Zealand’s participation in ISO committees please contact Standards New Zealand:ISOAdmin@standards.govt.nz
New Zealand Industry Reference Group (IRG) Members
Technical Committee 43: George Dodd, Stephen Chiles, James Whitlock
Standards Sub Committee 1: Stephen Chiles, George Dodd, Vern Goodwin, Wyatt Page, James Whitlock, Darran Humpheson
Standards Sub Committee 2: Stephen Chiles, Grant Emms, Vern Goodwin, George Dodd, Robin Wareing, James Whitlock
Working Group 45: Wyatt Page
Working Group 62: Darran Humpheson
ISO Standards Under Review
|
Standard |
Title |
Vote for |
Date |
NZ vote |
||
|
ISO/FDIS 3743-2 (Ed 2) |
Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Engineering methods for small, movable sources in reverberant fields -- Part 2: Methods for special reverberation test rooms |
Technical content of FDIS |
28/12/17 | |||
|
ISO/DIS 20189 |
Acoustics -- Screens furniture and single objects intended for interior use -- Rating of sound absorption and sound reduction of elements based on laboratory measurements |
Technical content of DIS |
27/12/17 | |||
|
ISO/DIS 11654 (Ed 2) |
Acoustics -- Sound absorbers -- Rating of sound absorption coefficients |
Technical content of DIS |
27/12/17 | |||
|
ISO/NP 10848-5 |
Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms -- Part 5: Radiation efficiencies of building elements |
New work item proposal |
|
|||
|
ISO/DIS 7779 (Ed 4) |
Acoustics -- Measurement of airborne noise emitted by information technology and telecommunications equipment |
Technical content of DIS |
20/12/17 | |||
|
ISO/FDIS 3822-3 (Ed 3) |
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances |
Technical content of FDIS |
01/12/17 | |||
|
ISO/DIS 19488 |
Acoustics -- Acoustic classification of dwellings |
Technical content of DIS |
06/12/17 | |||
|
ISO/DIS 16283-2 (Ed 2) |
Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation |
Technical content of DIS |
19/11/17 | |||
|
ISO/FDIS 389-1 (Ed 2) |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
Technical content of FDIS |
14/11/17 | |||
|
ISO/DIS 17201-1 (Ed 2) |
Acoustics -- Noise from shooting ranges -- Part 1: Determination of muzzle blast by measurement |
Technical content of DIS |
07/11/17 | |||
|
SC1 |
Acoustic quality of open office space |
New WG with convenor Y Le Muet |
03/10/17 |
No | ||
|
ISO/NP 22955 |
Acoustics -- Acoustic quality of open office spaces |
New work item proposal |
03/10/17 |
Disapprove | ||
|
ISO/DIS 3740 (Ed 3) |
Acoustics -- Determination of sound power levels of noise sources -- Guidelines for the use of basic standards |
Technical content of DIS |
02/10/17 |
Approve | ||
|
ISO/DIS 13473-1 (Ed 2) |
Characterization of pavement texture by use of surface profiles -- Part 1: Determination of mean profile depth |
Technical content of DIS |
02/10/17 |
Abstain | ||
|
ISO/CD 20270 |
Acoustics -- Characterization of sources of structure-borne sound with respect to sound radiation from connected structures -- Indirect in situ measurement of blocked forces at the contact points of machinery and equipment |
Circulation as DIS |
30/09/17 |
Abstain | ||
|
ISO 21388 |
Acoustics -- Hearing aid fitting management |
Merge Parts 1 & 2 |
10/09/17 |
Yes | ||
|
ISO 16283-1:2014/FDAmd 1 |
Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation -- Amendment 1 |
Technical content of FDIS |
16/08/17
|
Approve | ||
| ISO/FDIS 10848-1 (Ed 2) |
Acoustics -- Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms -- Part 1: Frame document |
Technical content of FDIS |
24/07/2017 |
Approve | ||
|
ISO 17497-2:2012 |
Acoustics -- Sound-scattering properties of surfaces -- Part 2: Measurement of the directional diffusion coefficient in a free field |
Systematic review |
04/09/17 |
Confirm |
||
|
ISO/DIS 12913-2 |
Acoustics -- Soundscape -- Part 2: Data collection and reporting requirements |
Technical content of DIS |
10/07/17 |
Disapprove |
||
|
ISO/FDIS 9296 (Ed 2) |
Acoustics -- Declared noise emission values of information technology and telecommunications equipment |
Technical content of FDIS |
15/06/17 |
Abstain |
||
|
ISO/CD 7779 |
Acoustics -- Measurement of airborne noise emitted by information technology and telecommunications equipment |
Circulation as DIS |
08/06/17 |
Abstain |
||
|
ISO 3382-3:2012 |
Acoustics -- Measurement of room acoustic parameters -- Part 3: Open plan offices |
Systematic review |
05/06/17 |
Confirm |
||
|
ISO/CD 21388-1 |
Acoustics - Hearing aid fitting management - Part 1: General framework |
Comments on CD |
02/05/17 |
No |
||
|
ISO/FDIS 1996-2 (Ed 3) |
Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of sound pressure levels |
Technical content of FDIS |
24/04/17 |
Abstain |
||
| ISO/CD 9053 |
Acoustics -- Materials for acoustical applications -- Determination of airflow resistance |
Circulation as DIS |
19/04/17 |
Approve |
||
|
ISO/DIS 4869-6 |
Acoustics -- Hearing protectors -- Part 6: Determination of sound attenuation of active noise reduction earmuffs |
Technical content of DIS |
18/04/17 |
Abstain | ||
|
ISO/NP 21388-2 |
Acoustics -- Hearing aid fitting management -- Part 2: Terminology |
New work item proposal |
18/04/17 |
Abstain |
||
|
ISO 11200:2014/DAmd 1 |
Acoustics -- Noise emitted by machinery and equipment -- Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions -- Amendment 1 |
Technical content of DIS |
13/04/17 |
Approve |
||
|
ISO/FDIS 12354-4 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 4: Transmission of indoor sound to the outside |
Technical content of FDIS |
20/03/17 |
Approve |
||
|
ISO/FDIS 12354-3 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 3: Airborne sound insulation against outdoor sound |
Technical content of FDIS |
20/03/17 |
Approve |
||
|
ISO/FDIS 12354-2 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 2: Impact sound insulation between rooms |
Technical content of FDIS |
20/03/17 |
Approve |
||
|
ISO/FDIS 12354-1 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 1: Airborne sound insulation between rooms |
Technical content of FDIS |
20/03/17 |
Approve |
||
|
ISO/DIS 3822-3 (Ed 3) |
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances |
Technical content of DIS |
23/03/17 |
Abstain |
||
|
ISO/DIS 389-1 (Ed 2) |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
Technical content of DIS |
14/03/17 |
Approve |
||
|
ISO 9052-1:1989 (vers 5) |
Acoustics -- Determination of dynamic stiffness -- Part 1: Materials used under floating floors in dwellings |
Systematic review |
06/03/16 |
Confirm |
||
|
ISO 17624:2004 (vers 3) |
Acoustics -- Guidelines for noise control in offices and workrooms by means of acoustical screens |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 13472-1:2002 (vers 3) |
Acoustics -- Measurement of sound absorption properties of road surfaces in situ -- Part 1: Extended surface method |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 11957:1996 (vers 4) |
Acoustics -- Determination of sound insulation performance of cabins -- Laboratory and in situ measurements |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 11820:1996 (vers 4) |
Acoustics -- Measurements on silencers in situ |
Systematic review |
06/03/16 |
Confirm |
||
|
ISO 11689:1996 (vers 4) |
Acoustics -- Procedure for the comparison of noise-emission data for machinery and equipment |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 10846-3:2002 (vers 3) |
Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
Systematic review |
06/03/16 |
Abstain |
||
| ISO 9613-2:1996 (vers 4 | Acoustics -- Attenuation of sound during propagation outdoors -- Part 2: General method of calculation |
Systematic review |
06/03/16 |
Confirm |
||
|
ISO 7574-4:1985 (vers 5) |
Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 4: Methods for stated values for batches of machines |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 7574-3:1985 (vers 5) |
Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 3: Simple (transition) method for stated values for batches of machines |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 7574-2:1985 (vers 5) |
Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 2: Methods for stated values for individual machines |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 7574-1:1985 (vers 5) |
Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 1: General considerations and definitions |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 5129:2001 (Ed 3, vers 3) |
Acoustics -- Measurement of sound pressure levels in the interior of aircraft during flight |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO 3745:2012 (Ed 3) |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for anechoic rooms and hemi-anechoic rooms |
Systematic review |
06/03/16 |
Confirm |
||
|
ISO 28961:2012 |
Acoustics -- Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions |
Systematic review | 06/03/16 | Confirm | ||
|
ISO 8253-3:2012 (Ed 2) |
Acoustics -- Audiometric test methods -- Part 3: Speech audiometry |
Systematic review |
06/03/16 |
Confirm |
||
|
ISO 389-8:2004 (vers 3) |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones |
Systematic review |
06/03/16 |
Abstain |
||
|
ISO/CD 20189-1 |
Acoustics -- Screens furniture and single objects intended for interior use -- Part 1: Rating of sound absorption and sound reduction of elements based on laboratory measurements |
Circulation as DIS |
03/03/17 |
Approve |
||
|
Guide 2 – Draft for Ed 2 |
Policy on treatment of measurement uncertainty in standards prepared by ISO/TC 43/SC 1 |
Publication of Guide |
01/03/17 |
Yes |
||
|
ISO/FDIS 26101 (Ed 2) |
Acoustics -- Test methods for the qualification of free-field environments |
Technical content of FDIS |
17/02/17 |
Approve |
||
|
ISO 3745:2012/FDAmd 1 |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for anechoic rooms and hemi-anechoic rooms -- Amendment 1 |
Technical content of FDIS |
17/02/17 |
Approve |
||
|
ISO/CD 19488-2 |
Acoustics – Acoustic classification of dwellings |
Circulation as DIS |
13/02/17 |
Yes |
||
|
WG 60 |
Method for transposition of dynamic forces generated by an active component from a test bench to a vehicle |
Establish new WG |
24/01/17 |
Yes |
||
|
ISO/FDIS 10140-4 (Ed 2) |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements |
Change from 36 to 48 month track |
21/01/17 |
Yes |
||
|
ISO 17201-1:2005 |
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement |
Skip CD and proceed to DIS |
05/01/17 |
Yes |
||
|
ISO/CD 11654 |
Acoustics -- Sound absorbers for use in buildings -- Rating of sound absorption |
Circulation as DIS |
02/01/17 |
Approve |
||
|
ISO/FDIS 11819-2 |
Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 2: The close-proximity method |
Technical content of FDIS |
15/12/16 |
Approve |
||
|
SC 2 |
Building acoustics |
Appoint V Wittstock as Chair |
15/12/16 |
Yes |
||
|
ISO/FDIS 7029 (Ed 3) |
Acoustics -- Statistical distribution of hearing thresholds related to age and gender |
Technical content of FDIS |
12/12/16 |
Approve |
||
|
ISO 10534-1:1996 (vers 4) |
Acoustics -- Determination of sound absorption coefficient and impedance in impedance tubes -- Part 1: Method using standing wave ratio |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO 3382-2:2008 (vers 2) |
Acoustics -- Measurement of room acoustic parameters -- Part 2: Reverberation time in ordinary rooms |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO/TS 15666:2003 (vers 3) |
Acoustics -- Assessment of noise annoyance by means of social and socio-acoustic surveys |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO 15664:2001 (vers 3) |
Acoustics -- Noise control design procedures for open plant |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 14257:2001 (vers 3) |
Acoustics -- Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO/TS 13475-2:2000 (vers 3) |
Acoustics -- Stationary audible warning devices used outdoors -- Part 2: Precision methods for determination of sound emission quantities |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 13475-1:1999 (vers 3) |
Acoustics -- Stationary audible warning devices used outdoors -- Part 1: Field measurements for determination of sound emission quantities |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO/PAS 11819-4:2013 |
Acoustics -- Method for measuring the influence of road surfaces on traffic noise -- Part 4: SPB method using backing board |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 11690-2:1996 (vers 4) |
Acoustics -- Recommended practice for the design of low-noise workplaces containing machinery -- Part 2: Noise control measures |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 11690-1:1996 (vers 4) |
Acoustics -- Recommended practice for the design of low-noise workplaces containing machinery -- Part 1: Noise control strategies |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 11205:2003 (vers 2) |
Acoustics -- Noise emitted by machinery and equipment -- Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 11203:1995 (vers 2) |
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 10846-5:2008 (vers 2) |
Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 10846-2:2008 (Ed 2, vers 2) |
Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
Systematic review |
05/12/16 |
Abstain |
||
| ISO 10846-1:2008 (Ed 2, vers 2) |
Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 1: Principles and guidelines |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 10302-2:2011 |
Acoustics -- Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices -- Part 2: Structure-borne vibration measurements |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 10302-1:2011 |
Acoustics -- Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices -- Part 1: Airborne noise measurement |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO 9611:1996 (vers 4) |
Acoustics -- Characterization of sources of structure-borne sound with respect to sound radiation from connected structures -- Measurement of velocity at the contact points of machinery when resiliently mounted |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 8297:1994 (vers 4) |
Acoustics -- Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment -- Engineering method |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO/TS 7849-1:2009 (vers 2) |
Acoustics -- Determination of airborne sound power levels emitted by machinery using vibration measurement -- Part 1: Survey method using a fixed radiation factor |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 7196:1995 (vers 4) |
Acoustics -- Frequency-weighting characteristic for infrasound measurements |
Systematic review |
05/12/16 |
Confirm |
||
| ISO 5130:2007 (Ed 2, vers 2) | Acoustics -- Measurements of sound pressure level emitted by stationary road vehicles | Systematic review | 05/12/16 |
Confirm |
||
|
ISO/TS 4869-5:2006 (vers 3) |
Acoustics -- Hearing protectors -- Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO 4869-3:2007 (vers 2) |
Acoustics -- Hearing protectors -- Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO 2923:1996 (Ed 2, vers 4) |
Acoustics -- Measurement of noise on board vessels |
Systematic review |
05/12/16 |
Abstain |
||
|
ISO 2922:2000 (Ed 2, vers 3) |
Acoustics -- Measurement of airborne sound emitted by vessels on inland waterways and harbours |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO 16:1975 (vers 5) |
Acoustics -- Standard tuning frequency (Standard musical pitch) |
Systematic review |
05/12/16 |
Confirm |
||
|
ISO/DIS 10848-1 (Ed 2) |
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms -- Part 1: Frame document |
Technical content of DIS |
27/11/16 |
Approve |
||
|
ISO/DIS 10848-2 (Ed 2) |
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms -- Part 2: Application to Type B elements when the junction has a small influence |
Technical content of DIS |
27/11/16 |
Approve |
||
|
ISO/DIS 10848-3 (Ed 2) |
Acoustics -- Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms -- Part 3: Application to Type B elements when the junction has a substantial influence |
Technical content of DIS |
27/11/16 |
Approve |
||
|
ISO/DIS 10848-4 (Ed 2) |
Acoustics -- Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms -- Part 4: Application to junctions with at least one Type A element |
Technical content of DIS |
27/11/16 |
Approve |
||
|
ISO/NP 21955 |
Vehicles -- Experimental method for transposition of dynamic forces generated by an active component from a test bench to a vehicle |
New work item proposal |
25/11/16 |
Abstain |
||
|
ISO/NP TR 17534-4 |
ISO/TR 17534-4 Acoustics -- Software for the calculation of sound outdoors -- Part 4: Recommendations for quality assured implementation of CNOSSOS EU calculation methods in software according to ISO 17534-1 |
New work item proposal |
19/10/16 |
Approve | ||
|
ISO/CD 13471-1 |
Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method |
Publication of DTS |
19/10/16 |
Approve | ||
| ISO/FDIS 10140-4 (Ed 2) | Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements |
Technical content of FDIS |
05/10/16 |
Approve | ||
|
ISO 3822-3 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances |
Skip CD stage |
04/10/16 |
Abstain |
||
|
WG 27 |
Indoor acoustic environment |
Appoint C Demanet as convenor |
27/09/16 |
Yes |
||
| ISO/TS 13473-4:2008 |
Characterization of pavement texture by use of surface profiles - Part 4: Spectral analysis of surface profiles |
Abandon revision |
01/09/16 |
Yes | ||
|
ISO/DTS 11819-3 |
Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 3: Reference tyres |
Publication of specification |
31/08/16 |
Approve |
||
|
ISO 16283-1:2014/DAmd 1 |
Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation -- Amendment 1 |
Technical content of DAmd |
29/08/16 |
Approve |
||
|
Guide 1 - Draft for Ed 3 |
Drafting instrumentation requirements in documents prepared by ISO/TC 43/SC 1 |
Publication of guide |
19/08/16 |
Yes |
||
|
ISO 11200:2014/CD Amd 1 |
Acoustics -- Noise emitted by machinery and equipment -- Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions -- Amendment 1 |
Circulation as DIS |
12/08/16 |
Yes |
||
|
ISO/DIS 532-2 (Ed 2) |
Acoustics -- Methods for calculating loudness -- Part 2: Moore-Glasberg method |
Technical content of DIS |
24/07/16 |
Approve | ||
|
ISO/DIS 532-1 |
Acoustics -- Methods for calculating loudness -- Part 1: Zwicker method |
Technical content of DIS |
24/07/16 |
Approve | ||
|
ISO/CD 19488 |
Acoustics -- Acoustic classification scheme for dwellings |
Circulation as DIS |
17/07/16 |
Yes with comments | ||
|
ISO/FDIS 10140-1 (Ed 2) |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 1: Application rules for specific products |
Technical content of FDIS |
10/07/16 | Approve with comments | ||
|
ISO/CD 12913-2 |
Acoustics -- Soundscape -- Part 2: Data collection |
Circulation as DIS |
10/07/16 |
Abstain | ||
|
ISO 389-7:2005/FDAmd 1 |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions -- Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions |
Technical content of FDAmd |
07/06/16 |
Approve | ||
|
ISO/FDIS 362-3 |
Measurement of noise emitted by accelerating road vehicles -- Engineering method -- Part 3: Indoor testing M and N categories |
Technical content of FDIS |
21/05/16 |
Abstain | ||
|
ISO/NP 17201-6 |
Acoustics – Noise from shooting ranges – Part 6: Measurement of noise exposure of shooter, observer or instructor for hearing protection |
New work item proposal |
23/05/16 |
Abstain | ||
|
ISO/NP 13471-1 |
Acoustics -- Temperature influence on tyre/road noise measurement -- Part 1: Correction for temperature when testing with the CPX method |
New work item proposal |
18/05/16 |
Approve | ||
|
NWIP ISO/TS 11819-3 |
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres |
New work item proposal |
03/05/16 |
Approve | ||
|
ISO/DIS 12354-4 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 4: Transmission of indoor sound to the outside |
Technical content of DIS |
28/04/16 | Approve | ||
|
ISO/DIS 12354-3 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 3: Airborne sound insulation against outdoor sound |
Technical content of DIS |
28/04/16 | Approve | ||
|
ISO/DIS 12354-2 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 2: Impact sound insulation between rooms |
Technical content of DIS |
28/04/16 |
Approve | ||
|
ISO/DIS 12354-1 |
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 1: Airborne sound insulation between |
Technical content of DIS |
28/04/16 |
Approve | ||
|
NWIP Hearing aid fitting management |
Acoustics - Hearing aid fitting management - Part 1: General framework |
New work item proposal |
07/04/16 |
Abstain | ||
|
ISO 3822-1:1999 (Ed 3, vers 3) |
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement |
Systematic review |
15/03/16 |
Abstain | ||
|
ISO 3822-2:1995 (Ed 2, vers 4) |
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves |
Systematic review |
15/03/16 |
Abstain | ||
|
ISO 15186-1:2000 (vers 3) |
Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 1: Laboratory measurements |
Systematic review |
15/03/16 |
Confirm | ||
|
ISO/FDIS 16254 |
Acoustics -- Measurement of sound emitted by road vehicles of category M and N standstill and low speed operation -- Engineering method |
Technical content of FDIS |
14/03/16 |
Abstain | ||
|
ISO/DIS 10140-4 (Ed 2) |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements |
Technical content of DIS |
03/03/16 |
Approve | ||
|
ISO 12124:2001 |
Acoustics -- Procedures for the measurement of real-ear acoustical characteristics of hearing aids |
Withdrawal |
01/02/16 |
Approve | ||
|
ISO/FDIS 1996-1 (Ed 3) |
Acoustics -- Description, measurement and assessment of environmental noise -- Part 1: Basic quantities and assessment procedures |
Technical content of FDIS |
27/12/15 |
Approve | ||
|
ISO/CD 389-1 |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
Circulation as DIS |
22/12/15 |
Yes | ||
|
ISO 10140-2:2010 |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 2: Measurement of airborne sound insulation |
Systematic review |
15/12/15 |
Confirm | ||
|
ISO 10140-3:2010 |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 3: Measurement of impact sound insulation |
Systematic review |
15/12/15 |
Confirm | ||
|
ISO 10140-5:2010 |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 5: Requirements for test facilities and equipment |
Systematic review |
15/12/15 |
Confirm | ||
|
ISO/DIS 11819-2.2 |
Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 2: The close-proximity method |
Technical content of DIS |
01/12/15 |
Approve with comments | ||
|
ISO/FDIS 16283-3 |
Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 3: Façade sound insulation |
Technical content of FDIS |
01/12/15 |
Approve | ||
|
ISO/FDIS 389-3 (Ed 2) |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators |
Technical content of FDIS |
01/12/15 |
Approve | ||
|
ISO/FDIS 6926 (Ed 3) |
Acoustics -- Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
Technical content of FDIS |
24/11/15 |
Abstain | ||
|
ISO 15712-1 to -4 |
Building Acoustics -- Estimation of acoustic performance of buildings from the performance of elements |
Revision with EN 12354 led by CEN and renumber to ISO 12354 |
14/11/15 |
Yes | ||
|
ISO 12124 |
Acoustics – Procedures for the measurement of real-ear acoustical characteristics of hearing aids |
Withdraw when replaced by IEC 61669 |
01/11/15 |
Yes | ||
|
ISO/CD 3740 |
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of sound power levels |
Circulation as DIS |
09/09/15 |
Yes | ||
|
ISO/DIS 1996-2 (Ed 3) |
Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels |
Technical content of DIS |
02/09/15 |
Abstain | ||
| ISO 389-7:2005/DAmd 1 |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions -- Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions |
Technical content of DIS |
14/08/15 |
Approve | ||
|
ISO/DIS 7029 (Ed 3) |
Acoustics - Statistical distribution of hearing thresholds related to age and gender |
Technical content of DIS |
13/08/15 |
Approve with comments |
||
|
ISO 3743-2 |
Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms |
Amendment to proceed as FDIS |
15/07/15 |
Yes | ||
|
WG57 |
In-situ measurements of blocked forces |
Establish new working group |
28/06/15 |
Yes | ||
|
ISO/PWI 18484 |
Acoustics -- Indoor acoustic environment |
New work item proposal |
18/06/15 |
Disapprove |
||
|
ISO/NP 20189-1 |
Acoustics -- Screens furniture and single objects intended for interior use -- Part 1: Rating of sound absorption and sound reduction of elements based on laboratory measurements |
New work item proposal |
17/06/15 |
Approve | ||
|
ISO 8253-1:2010 (Ed 2) |
Acoustics -- Audiometric test methods -- Part 1: Pure-tone air and bone conduction audiometry |
Systematic review |
15/06/15 |
Confirm | ||
|
ISO 389-6:2007 (vers 2) |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 6: Reference threshold of hearing for test signals of short duration |
Systematic review |
15/06/15 |
Confirm | ||
|
ISO 389-4:1994 (vers 4) |
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 4: Reference levels for narrow-band masking noise |
Systematic review |
15/06/15 |
Confirm | ||
|
ISO 3741:2010 (Ed 4) |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for reverberation test rooms |
Systematic review |
15/06/15 |
Confirm |
||
|
ISO 3743-1:2010 (Ed 2) |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for small movable sources in reverberant fields -- Part 1: Comparison method for a hard-walled test room |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 3744:2010 (Ed 3) |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for an essentially free field over a reflecting plane |
Systematic review |
15/06/15 |
Confirm |
||
|
ISO 3746:2010 (Ed 3) |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 3747:2010 (Ed 3) |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering/survey methods for use in situ in a reverberant environment |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 7779:2010 (Ed 3) |
Acoustics -- Measurement of airborne noise emitted by information technology and telecommunications equipment |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 9613-1:1993 (vers 4) |
Acoustics -- Attenuation of sound during propagation outdoors -- Part 1: Calculation of the absorption of sound by the atmosphere |
Systematic review |
15/06/15 |
Confirm |
||
|
ISO 11201:2010 (Ed 2) |
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 11202:2010 (Ed 2) |
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 11204:2010 (Ed 2) |
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 11546-1:1995 (vers 4) |
Acoustics -- Determination of sound insulation performances of enclosures -- Part 1: Measurements under laboratory conditions (for declaration purposes) |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 11546-2:1995 (vers 4) |
Acoustics -- Determination of sound insulation performances of enclosures -- Part 2: Measurements in situ (for acceptance and verification purposes) |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 11691:1995 (vers 4) |
Acoustics -- Measurement of insertion loss of ducted silencers without flow -- Laboratory survey method |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 15667:2000 (vers 3) |
Acoustics -- Guidelines for noise control by enclosures and cabins |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 17201-3:2010 |
Acoustics -- Noise from shooting ranges -- Part 3: Guidelines for sound propagation calculations |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO 17201-5:2010 |
Acoustics -- Noise from shooting ranges -- Part 5: Noise management |
Systematic review |
15/06/15 |
Abstain |
||
|
ISO/CD 10140-4.2 |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements |
Circulate as DIS |
26/05/15 |
Yes | ||
|
ISO/DIS 9296.2 (Ed 2) |
Acoustics -- Declared noise emission values of information technology and telecommunications equipment |
Technical content of DIS |
23/05/15 |
Abstain | ||
|
ISO 3745:2012/DAmd 1 |
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for anechoic rooms and hemi-anechoic rooms -- Amendment 1 |
Technical content of draft |
19/05/15 |
Abstain | ||
| ISO 26101:2012/DAmd 1 | Acoustics -- Test methods for the qualification of free-field environments -- Amendment 1 | Technical content of draft amendment | 19/05/15 | Abstain | ||
|
ISO/DIS 10140-1 (Ed 2) |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 1: Application rules for specific products |
Technical content of draft |
4/05/15 |
Approve |
||
|
ISO/DIS 4869-2 (Ed 2) |
Acoustics -- Hearing protectors -- Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
Technical content of DIS |
4/05/15 |
Abstain |
||
|
ISO/DIS 4869-1 (Ed 2) |
Acoustics -- Hearing protectors -- Part 1: Subjective method for the measurement of sound attenuation |
Technical content of DIS |
15/04/15 |
Approve with comments |
||
|
ISO/DIS 16254.2 |
Acoustics -- Measurement of sound emitted by road vehicles of category M and N standstill and low speed operation -- Engineering method |
Technical content of DIS |
11/04/15 |
Abstain |
||
|
ISO/PWI 354 |
Acoustics - Measurement of sound absorption in a reverberation room |
Reinstallation of ISO/PWI 354 |
31/03/15 |
Yes | ||
|
ISO/CD 532-2.2 |
Acoustics -- Methods for calculating loudness -- Part 2: Moore-Glasberg method |
Circulate as DIS |
31/03/15 |
Abstain |
||
| ISO/FDIS 1683 (Ed 3) | Acoustics -- Preferred reference values for acoustical and vibratory levels | Technical content of FDIS | 29/03/15 | Approve | ||
|
ISO/FDIS 16283-2 |
Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation |
Technical content of FDIS |
29/04/15 |
Approve with comments |
||
|
ISO/CD 13473-1 |
Characterization of pavement texture by use of surface profiles -- Part 1: Determination of mean profile depth |
Circulate draft as a DIS |
17/03/15 |
Abstain |
||
|
ISO 10140-3:2010/FDAmd 1 |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 3: Measurement of impact sound insulation -- Amendment 1 |
Technical content of FDIS |
15/03/15 |
Abstain |
||
|
ISO/PWI 12999-2
|
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound Absorption
|
Reinstallation of PWI |
13/03/15
|
Yes |
||
| ISO/DIS 389-3 (Ed 2) | Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators | Technical content of DIS | 9/03/15 | Abstain | ||
|
TC43/SC1/WG40 |
Impulse sound propagation for environmental noise assessment |
Disband WG40 |
15/02/15 |
Yes |
||
|
ISO/CD 10140-4 |
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements |
Circulate draft as DIS |
13/02/15 |
Yes |