ISO Standards Committees
New Zealand (through Standards New Zealand) is a P (voting) member on ISO Technical Committee 43 (Acoustics) and its Sub Committees 1 (Noise) and 2 (Building acoustics).
This page lists the ISO standards under review, and lists the New Zealand Industry Reference Group (IRG) Members.
If you have comments or contributions on any of the Standards in the table below please contact the IRG members listed below. For any other queries about New Zealand’s participation in ISO committees please contact Standards New Zealand:ISOAdmin@standards.govt.nz
New Zealand Industry Reference Group (IRG) Members
Technical Committee 43: George Dodd, Stephen Chiles, James Whitlock, Ben de Farias
Working Group 1: Ben de Farias
Working Group 10: Ben de Farias
Standards Sub Committee 1: Stephen Chiles, George Dodd, Wyatt Page, James Whitlock, Darran Humpheson, Michael Kingan, Richard Jackett, Siiri Wilkening and Damian Ellerton.
Working Group 27: Richard Jackett
Working Group 33: Richard Jackett
Working Group 39: Robin Wareing
Working Group 45: Wyatt Page and Damian Ellerton
Working Group 56: Siiri Wilkening
Working Group 68: Darran Humpheson
Ad Hoc Group 4: Richard Jackett, James Whitlock
Standards Sub Committee 2: Stephen Chiles, George Dodd, Robin Wareing, James Whitlock, Gian Schmid, Yusuke Hioka
Working Group 18 – George Dodd, Gian Schmid, Michael Kingan
Working Group 36: Yusuke Hioka
ISO Standards Under Review
| Standard | Title | Vote for | Date | NZ vote |
|---|---|---|---|---|
| ISO 11904-2:2021 (Ed 2) | Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin | Systematic review | 04/06/2026 | Confirm |
| ISO 389-4:1994 (vers 6) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 4: Reference levels for narrow-band masking noise | Systematic review | 04/06/2026 | Confirm |
| ISO 389-6:2007 (vers 4) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 6: Reference threshold of hearing for test signals of short duration | Systematic review | 04/06/2026 | Confirm |
| ISO 8253-1:2010 (Ed 2, vers 3) | Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry | Systematic review | 04/06/2026 | Confirm |
| ISO 11201:2010 (Ed 2, vers 3) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections | Systematic review | 04/06/2026 | Abstain |
| ISO 11202:2010 (Ed 2, vers 3) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections | Systematic review | 04/06/2026 | Abstain |
| ISO 11204:2010 (Ed 2, vers 3) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections | Systematic review | 04/06/2026 | Abstain |
| ISO 11546-1:1995 (vers 6) | Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) | Systematic review | 04/06/2026 | Abstain |
| ISO 11546-2:1995 (vers 6) | Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) | Systematic review | 04/06/2026 | Abstain |
| ISO 15667:2000 (vers 5) | Acoustics — Guidelines for noise control by enclosures and cabins | Systematic review | 04/06/2026 | Abstain |
| ISO 17201-5:2010 (vers 3) | Acoustics — Noise from shooting ranges — Part 5: Noise management | Systematic review | 04/06/2026 | Confirm |
| ISO 3743-1:2010 (Ed 2, vers 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room | Systematic review | 04/06/2026 | Confirm |
| ISO 3746:2010 (Ed 3, vers 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane | Systematic review | 04/06/2026 | Confirm |
| ISO 3747:2010 (Ed 3, vers 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment | Systematic review | 04/06/2026 | Confirm |
| ISO 9613-1:1993 (vers 6) | Acoustics — Attenuation of sound during propagation outdoors — Part 1: Calculation of the absorption of sound by the atmosphere | Systematic review | 04/06/2026 | Confirm |
| ISO 18233:2006 (vers 4) | Acoustics — Application of new measurement methods in building and room acoustics | Systematic review | 04/06/2026 | Confirm |
| ISO/TC 43/SC 2 | Building acoustics | Comments on SBP | 30/04/2026 | Abstain |
| ISO/TC 43/SC 1 | Noise | Comments on SBP | 30/04/2026 | Abstain |
| ISO/TC 43 | Acoustics | Comments on SBP | 30/04/2026 | Abstain |
| ISO/TC 43/SC 1 | Assessment and prediction of noise annoyance | New WG with Li Xiaodong as convenor | 20/04/2026 | Yes |
| ISO/NP 26573 | Acoustics — Procedures for assessment and prediction of noise annoyance | New work item proposal | 20/04/2026 | Abstain |
| ISO/PWI 21791 | Sound sources for building acoustics | Re-register | 17/04/2026 | Yes |
| ISO/PWI 9052-1 | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings | Re-register | 17/04/2026 | Yes |
| ISO/CD 3382-1 | Acoustics — Measurement of room acoustic parameters — Part 1: Spaces for music, speech and communication | Comments on CD | 31/03/2026 | No |
| ISO/PWI 1996-2 | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels | Re-register | 31/03/2026 | Yes |
| ISO/DIS 4869-7 | Acoustics — Hearing protectors — Part 7: Method to measure the response of hearing protectors with high-level impulsive noise on an acoustic test fixture | Technical content of DIS | 20/03/2026 | Abstain |
| ISO 7779:2018 | Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment | Revise with Ikuo Kimizuka as project leader | 06/03/2026 | Yes |
| ISO 9296:2017 | Acoustics — Declared noise emission values of information technology and telecommunications equipment | Revise with Ikuo Kimizuka as project leader | 06/03/2026 | Yes |
| ISO 2922:2020 (Ed 3) | Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours | Systematic review | 04/03/2026 | Confirm |
| ISO 11690-1:2020 (Ed 2) | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies | Systematic review | 04/03/2026 | Abstain |
| ISO 11690-2:2020 (Ed 2) | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures | Systematic review | 04/03/2026 | Abstain |
| ISO/TS 20065:2022 | Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method | Systematic review | 04/03/2026 | Confirm |
| ISO 717-1:2020 (Ed 4) | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation | Systematic review | 04/03/2026 | Confirm |
| ISO 717-2:2020 (Ed 4) | Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Systematic review | 04/03/2026 | Confirm |
| ISO/DIS 18484 | Acoustics — Design process for the acoustic environment of buildings | Technical content of DIS | 04/02/2026 | Abstain |
| ISO 20270 | Acoustics — Characterization of sources of structure-borne sound and vibration — Indirect measurement of blocked forces | Extend project limit date | 23/01/2026 | Yes |
| ISO 9613-2:2024/CD Amd 1 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: Engineering method for the prediction of sound pressure levels outdoors — Amendment 1 | Comments on CD | 22/01/2026 | No |
| ISO/PWI 25626 | Determination of sound energy levels | New work item proposal | 19/01/2026 | Approve |
| ISO/CD 12001 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code | Comments on CD | 13/01/2026 | No |
| ISO/PWI 20678 | Acoustics – Measurement of high-frequency airborne sound pressure levels | Re-register | 31/12/2025 | Yes |
| ISO/TC 43/SC 1/JWG 1 | Determination of high frequency sound pressure levels emitted by high intensity ultrasonic equipment | Reappoint Takayuki Hoshi as convenor | 31/12/2025 | Yes |
| ISO/TC 43/SC 1 /WG 69 | Noise control design procedures for open plant | Disband WG 69 | 31/12/2025 | Yes |
| ISO/TC 43/SC 1/WG 56 | Quality assurance of noise calculation methods implemented in software | Reappoint Wolfgang Probst as convenor | 31/12/2025 | Yes |
| ISO 362-1:2022 | Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories | Revise with Moritz Bertazzon as project leader | 22/12/2025 | Yes |
| ISO 362-3:2022 | Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 3: Indoor testing M and N categories | Revise with Ulrich Messer as project leader | 22/12/2025 | Yes |
| ISO 3095:2025 | Railway applications – Acoustics – Measurement of noise emitted by railbound vehicles | Correct clause 6.3.4 | 19/12/2025 | Yes |
| ISO/TC 163 | Thermal performance and energy use in the built environment | Approve liaison with Hiroshi Sato as representative | 17/12/2025 | Yes |
| ISO/TR 11688-1:1995 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning | Review | 05/12/2025 | Abstain |
| ISO/TR 11688-2:1998 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 2: Introduction to the physics of low-noise design | Review | 05/12/2025 | Abstain |
| ISO/TR 11690-3:1997 | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 3: Sound propagation and noise prediction in workrooms | Review | 05/12/2025 | Abstain |
| ISO/PAS 1996-3:2022 | Acoustics — Description, measurement and assessment of environmental noise — Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of L Aeq | Systematic review | 02/12/2025 | Confirm |
| ISO 5135:2020 (Ed 3) | Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room | Systematic review | 02/12/2025 | Confirm |
| ISO 11691:2020 (Ed 2) | Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method | Systematic review | 02/12/2025 | Confirm |
| ISO/TS 13471-2:2022 | Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods | Systematic review | 02/12/2025 | Confirm |
| ISO 9053-2:2020 | Acoustics — Determination of airflow resistance — Part 2: Alternating airflow method | Systematic review | 02/12/2025 | Confirm |
| ISO 10848-5:2020 | Acoustics — Laboratory and field measurement of the flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 5: Radiation efficiencies of building elements | Systematic review | 02/12/2025 | Confirm |
| ISO 16283-2:2020 (Ed 3) | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Systematic review | 02/12/2025 | Confirm |
| ISO/TC 43/SC 2/WG 27 | Indoor acoustic environment | Reappoint René Gamba as convenor | 29/11/2025 | Yes |
| ISO/CD 5130 | Acoustics — Measurements of sound pressure level emitted by stationary road vehicles | Comments on CD | 10/11/2025 | No |
| ISO/FDIS 15664 | Acoustics — Noise control design procedures for open plant | Technical content of FDIS | 05/11/2025 | Abstain |
| ISO/TC43/SC1/WG68 | Non-acoustic factors | Reappoint Philip Dunbavin as convenor | 31/10/2025 | Yes |
| ISO/CD 16283-3 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation | Extend project duration by 12 months | 29/10/2025 | Yes |
| ISO/CD TS 12913-4 | Acoustics — Soundscape — Part 4: Design and intervention | Comments on CD | 17/10/2025 | No |
| ISO/TC43/SC1/WG57 | In-situ measurements of blocked forces | Appoint Jan Herrmann as convenor | 10/10/2025 | Yes |
| ISO/TC43/WG10 | Threshold of hearing | Appoint Kenji Kurakata as convenor | 10/10/2025 | Yes |
| ISO/CD 16283-3 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation | Comments on CD | 25/09/2025 | No |
| ISO/DIS 21388-1 (Ed 2) | Acoustics — Hearing aid fitting management (HAFM) — Part 1: General process | Technical content of DIS | 17/09/2025 | Approve |
| ISO/NP 13473-7 | Characterization of pavement texture using surface profiles — Part 7: Concepts of macro- and megatexture measurement; classification, requirements and verification of profilometers | New work item proposal | 16/09/2025 | Approve |
| ISO/PWI 3382-1 | Acoustics — Measurement of room acoustic parameters — Part 1: Spaces for music, speech and communication | Revise with Jens Holger Rindel as project leader | 15/09/2025 | Yes |
| ISO 1999:2013 | Acoustics — Estimation of noise-induced hearing loss | Cancel revision | 15/09/2025 | Yes |
| ISO 9613-2:2024 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: Engineering method for the prediction of sound pressure levels outdoors | Amend with Wolfgang Probst as project leader | 12/09/2025 | Yes |
| ISO 11819-2:2017 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method | Revise with Ulf Sandberg as project leader | 24/07/2025 | Yes |
| ISO 389-2:1994 (vers 6) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones | Systematic review | 02/09/2025 | Confirm |
| ISO 389-5:2006 (vers 4) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz | Systematic review | 02/09/2025 | Confirm |
| ISO 389-9:2009 (vers 3) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 9: Preferred test conditions for the determination of reference hearing threshold levels | Systematic review | 02/09/2025 | Confirm |
| ISO 1683:2015 (Ed 3, vers 2) | Acoustics — Preferred reference values for acoustical and vibratory levels | Systematic review | 02/09/2025 | Confirm |
| ISO 8253-2:2009 (Ed 2, vers 3) | Acoustics — Audiometric test methods — Part 2: Sound field audiometry with pure-tone and narrow-band test signals | Systematic review | 02/09/2025 | Confirm |
| ISO 16832:2006 (vers 4) | Acoustics — Loudness scaling by means of categories | Systematic review | 02/09/2025 | Confirm |
| ISO 17534-1:2015 (vers 2) | Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance | Systematic review | 02/09/2025 | Confirm |
| ISO 3822-4:1997 (Ed 2, vers 5) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances | Systematic review | 02/09/2025 | Abstain |
| ISO 12999-1:2020 (Ed 2) | Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation | Systematic review | 02/09/2025 | Confirm |
| ISO 12999-2:2020 | Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption | Systematic review | 02/09/2025 | Confirm |
| ISO 15186-2:2003 (vers 4) | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 2: Field measurements | Systematic review | 02/09/2025 | Confirm |
| ISO 15186-3:2002 (vers 4) | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 3: Laboratory measurements at low frequencies | Systematic review | 02/09/2025 | Confirm |
| ISO 16283-1:2014 (vers 2) | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation | Systematic review | 02/09/2025 | Confirm |
| ISO 23351-1:2020 | Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 1: Laboratory method | Systematic review | 02/09/2025 | Abstain |
| ISO/DIS 23351-2 | Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 2: Field method | Technical content of DIS | 14/08/2025 | Abstain |
| ISO 12354-1 / -2 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements | Revise with Michel Villot as project leader | 13/08/2025 | Yes |
| ISO/DIS 9053-1 (Ed 2) | Acoustics — Determination of airflow resistance — Part 1: Static airflow method | Technical content of DIS | 07/08/2025 | Abstain |
| ISO/FDIS 3095 (Ed 4) | Railway applications — Acoustics — Measurement of noise emitted by railbound vehicles | Technical content of FDIS | 31/07/2025 | Approve with comments |
| ISO/CD 4869-7 | Acoustics — Hearing protectors — Part 7: Method to measure the response of hearing protectors with high-level impulse noise on an acoustic test fixture | Comments on CD | 21/07/2025 | No |
| ISO/TC 43/WG 1 | Threshold of hearing | Nomination for convenor | 30/06/2025 | No |
| ISO 5130:2019 | Acoustics – Measurements of sound pressure level emitted by stationary road vehicles | Revise with Truls Berge as project leader | 27/06/2025 | Yes |
| ISO/TC 269/SC 1/AHG 3 | Noise barrier | Approve liaison with Massimo Garai as representative | 25/06/2025 | Yes |
| ISO/DTS 1999 (Ed 4) | Acoustics — Estimation of noise-induced hearing loss | Technical content of DTS | 25/06/2025 | Approve |
| ISO 13473-5:2025 | Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture | Correct formula in 3.3.5 | 11/06/2025 | Yes |
| ISO/FDIS 17201-4 (Ed 2) | Acoustics — Noise from shooting ranges — Part 4: Calculation of projectile sound | Technical content of FDIS | 10/06/2025 | Abstain |
| ISO/FDIS 17201-2 (Ed 2) | Acoustics — Noise from shooting ranges — Part 2: Calculation of muzzle blast | Technical content of FDIS | 06/06/2025 | Abstain |
| ISO 20906:2009 (vers 3) | Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports | Systematic review | 04/06/2025 | Confirm |
| ISO 13474:2009 (vers 3) | Acoustics — Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment | Systematic review | 04/06/2025 | Abstain |
| ISO 12913-1:2014 (vers 2) | Acoustics — Soundscape — Part 1: Definition and conceptual framework | Systematic review | 04/06/2025 | Abstain |
| ISO 11200:2014 (Ed 2, vers 2) | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | Systematic review | 04/06/2025 | Abstain |
| ISO 9295:2015 (Ed 2, vers 2) | Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment | Systematic review | 04/06/2025 | Confirm |
| ISO 362-2:2009 (vers 3) | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 2: L category | Systematic review | 04/06/2025 | Confirm |
| ISO/FDIS 13472-2 (Ed 2) | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces | Technical content of FDIS | 23/04/2025 | Approve |
| ISO/TC 43/SC 1 | Noise | Appoint Douglas Manvell liaison to ECMA TC26 TG5 | 22/04/2025 | Yes |
| ISO/DTS 12913-3 (Ed 2) | Acoustics — Soundscape — Part 3: Data analysis | Technical content of DTS | 11/04/2025 | Abstain |
| ISO/PWI TS 17534-3.2 | Acoustics — Software for the calculation of sound outdoors — Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1 | New work item proposal | 09/04/2025 | Approve |
| ISO/DTS 16755-1 | Acoustics — Non acoustic factors influencing the perception, interpretation and response to environmental sounds — Part 1: Definition and conceptual framework | Technical content of DTS | 09/04/2025 | Approve |
| ITU-T Q2/21 | Accurate dosimetry for close-fitting listening devices | Approve liaison with Jérémie Voix as representative | 04/04/2025 | Yes |
| ISO/CD 18484 | Acoustics — Design process for the acoustic environment of buildings | Comments on CD | 02/04/2025 | Abstain |
| ISO/DIS 15664 (Ed 2) | Acoustics — Noise control design procedures for open plant | Technical content of DIS | 10/03/2025 | Abstain |
| ISO 16251-1:2014 (vers 2) | Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor | Systematic review | 04/03/2025 | Confirm |
| ISO/PAS 13473-6:2021 | Characterization of pavement texture by use of surface profiles — Part 6: Verification of the performance of laser profilometers used for pavement texture measurements | Systematic review | 04/03/2025 | Confirm |
| ISO/TS 12913-2:2018 (vers 2) | Acoustics — Soundscape — Part 2: Data collection and reporting requirements | Systematic review | 04/03/2025 | Confirm |
| ISO 389-7:2019 (Ed 3) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions | Systematic review | 04/03/2025 | Confirm |
| ISO/FDIS 13473-5 (Ed 2) | Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture | Technical content of FDIS | 12/02/2025 | Abstain |
| ISO/NWIP 10534-3 | Acoustics – Determination of properties in impedance tubes – Part 3: 3-microphone technique for bulk properties | New work item proposal | 09/02/2025 | Yes |
| ISO 23591:2021/DAmd 1 | Acoustic quality criteria for music rehearsal rooms and spaces — Amendment 1: Asian (Korean) traditional music (Gugak) | Technical content of DIS | 13/01/2025 | Approve |
| ISO/TC 43 | Acoustics | Approve updated business plan | 20/12/2024 | Yes |
| ISO/TC 43 | Acoustics | Confirm decision on ISO 3744, re GOST R appeal | 13/12/2024 | Yes |
| ISO 5130:2019 (Ed 3) | Acoustics — Measurements of sound pressure level emitted by stationary road vehicles | Systematic review | 02/12/2024 | Confirm |
| ISO 1999 | Acoustics — Estimation of noise-induced hearing loss | Change revision to TS | 24/11/2024 | Yes |
| ISO/FDIS 16254 (Ed 2) | Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method | Technical content of FDIS | 21/11/2024 | Abstain |
| ISO/TC 43/SC 1 & SC2 | Noise and Building Acoustics | Comments on Volker Wittstock and Jeffrey Mahn as chairs | 10/10/2024 | Yes |
| ISO/TC 43/SC 1 | Noise | Comments on Volker Wittstock as chair | 10/10/2024 | No |
| ISO/NWIP 16283-3 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation | New work item proposal | 08/10/2024 | Approve |
| ISO/FDIS 3744 | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane | Technical content of FDIS | 12/09/2024 | Approve |
| ISO/DIS 1999 (Ed 4) | Acoustics — Estimation of noise-induced hearing loss | Technical content of DIS | 11/09/2024 | Approve |
| ISO/DIS 17201-4 (Ed 2) | Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound | Technical content of DIS | 09/09/2024 | Abstain |
| ISO/DIS 17201-2 (Ed 2) | Acoustics — Noise from shooting ranges — Part 2: Prediction of muzzle blast | Technical content of DIS | 09/09/2024 | Abstain |
| ISO/TS 15666:2021 (Ed 2) | Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys | Systematic review | 02/09/2024 | Confirm |
| ISO/TC 43 | Acoustics | Comments on strategic business plan | 02/09/2024 | No |
| ISO 20270 | Acoustics — Characterization of sources of structure- borne sound and vibration — Indirect measurement of blocked forces | Revise with Andrew Elliot as project leader | 25/08/2024 | Yes |
| ISO 1996-1 | Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures | Cancel revision and register as new PWI | 25/08/2024 | Yes |
| ISO/TC 43 | Acoustics | Comments on Thomas Fedtke as chair | 25/08/2024 | No |
| ISO/TC 43 | Acoustics | Confirm decision on ISO 9612, re GOST R appeal | 16/08/2024 | Yes |
| ISO 23591:2021/CD Amd 1 | Acoustic quality criteria for music rehearsal rooms and spaces — Amendment 1 | Comments on CD | 31/07/2024 | No |
| ISO/DIS 13472-2 (Ed 2) | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces | Technical content of DIS | 12/07/2024 | Disapprove |
| ISO/DIS 13473-5 (Ed 2) | Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture | Technical content of DIS | 04/07/2024 | Abstain |
| ISO/PWI 7235 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss | Cancel revision and register as new PWI | 28/06/2024 | Yes |
| ISO 354:2003 (Ed 2, vers 5) | Acoustics — Measurement of sound absorption in a reverberation room | Systematic review | 03/06/2024 | Confirm |
| ISO 17201-3:2019 (Ed 2) | Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations | Systematic review | 03/06/2024 | Abstain |
| ISO 13473-1:2019 (Ed 2) | Characterization of pavement texture by use of surface profiles — Part 1: Determination of mean profile depth | Systematic review | 03/06/2024 | Confirm |
| ISO/TS 11819-3:2021 (Ed 2) | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres | Systematic review | 03/06/2024 | Confirm |
| ISO 4869-6:2019 | Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs | Systematic review | 03/06/2024 | Abstain |
| ISO 3740:2019 (Ed 3) | Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards | Systematic review | 03/06/2024 | Confirm |
| ISO/FDIS 5114-1 | Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements | Technical content of FDIS | 13/05/2024 | Abstain |
| ISO/CD 23351-2 | Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 2: Field method | Comments on CD | 07/05/2024 | No |
| ISO/FDIS 26101-2 | Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction | Technical content of FDIS | 01/05/2024 | Abstain |
| ISO/TC 43/SC 3 | Underwater acoustics | Reappoint Stephen Robinson as chair | 11/04/2024 | Yes |
| ISO/FDIS 21388-2 | Acoustics — Hearing aid fitting management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM) | Technical content of FDIS | 11/04/2024 | Approve |
| ISO/CD 15664 | Acoustics — Noise control design procedures for open plant | Comments on CD | 27/03/2024 | No |
| ISO/CD 15664 | Acoustics — Noise control design procedures for open plant | Scope change/clarification | 27/03/2024 | Yes |
| ISO/FDIS 13473-4 | Characterization of pavement texture by use of surface profiles — Part 4: One third octave band spectral analysis of surface profiles | Technical content of FDIS | 21/03/2024 | Approve |
| ISO 20189:2018 | Acoustics — Screens, furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements | Systematic review | 03/03/2024 | Abstain |
| ISO 17497-1:2004 (vers 4) | Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room | Systematic review | 03/03/2024 | Confirm |
| ISO 9053-1:2018 | Acoustics — Determination of airflow resistance — Part 1: Static airflow method | Systematic review | 03/03/2024 | Confirm |
| ISO 13473-3:2002 (vers 4) | Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers | Systematic review | 03/03/2024 | Confirm |
| ISO 13473-2:2002 (vers 4) | Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis | Systematic review | 03/03/2024 | Confirm |
| ISO 11821:1997 (vers 5) | Acoustics — Measurement of the in situ sound attenuation of a removable screen | Systematic review | 03/03/2024 | Abstain |
| ISO 10847:1997 (vers 4) | Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types | Systematic review | 03/03/2024 | Abstain |
| ISO 10843:1997 (vers 5) | Acoustics — Methods for the description and physical measurement of single impulses or series of impulses | Systematic review | 03/03/2024 | Abstain |
| ISO 9645:1990 (vers 6) | Acoustics — Measurement of noise emitted by two-wheeled mopeds in motion — Engineering method | Systematic review | 03/03/2024 | Abstain |
| ISO 9614-3:2002 (vers 4) | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning | Systematic review | 03/03/2024 | Confirm |
| ISO 9614-2:1996 (vers 6) | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning | Systematic review | 03/03/2024 | Confirm |
| ISO 9614-1:1993 (vers 5) | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points | Systematic review | 03/03/2024 | Confirm |
| ISO 8297:1994 (vers 5) | Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method | Systematic review | 03/03/2024 | Abstain |
| ISO 7779:2018 (Ed 4) | Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment | Systematic review | 03/03/2024 | Abstain |
| ISO 7235:2003 (Ed 2, vers 4) | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss | Systematic review | 03/03/2024 | Confirm |
| ISO 4871:1996 (Ed 2, vers 4) | Acoustics — Declaration and verification of noise emission values of machinery and equipment | Systematic review | 03/03/2024 | Abstain |
| ISO 4869-2:2018 (Ed 2) | Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn | Systematic review | 03/03/2024 | Confirm |
| ISO 4869-1:2018 (Ed 2) | Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation | Systematic review | 03/03/2024 | Confirm |
| ISO 11904-1:2002 (vers 4) | Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique) | Systematic review | 03/03/2024 | Confirm |
| ISO/TC 43/SC 1/WG 23 | Measurement of noise from information technology, business and telecommunications equipment | Appoint Chris Peterson as convenor | 02/02/2024 | Yes |
| ISO/FDIS 9612 (Ed 3) | Acoustics — Determination of occupational noise exposure — Methodology | Technical content of FDIS | 02/02/2024 | Abstain |
| ISO/FDIS 16032 (Ed 2) | Acoustics — Measurement of sound pressure level from service equipment or activities in buildings — Engineering method | Technical content of FDIS | 29/01/2024 | Abstain |
| EN ISO 12354-1 and -2 | Building acoustics – Estimation of acoustic performance of buildings from the performance of elements | Revise with CEN lead | 24/01/2024 | Yes |
| ISO/TC 43/SC2/WG34 | Speech attenuation | Change WG34 title and scope | 24/01/2024 | Yes |
| ISO/TC 43/SC 3 | Underwater acoustics | Apply for new secretariat | 31/12/2023 | No |
| ISO/FDIS 10302-1 (Ed 2) | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement | Technical content of FDIS | 28/11/2023 | Abstain |
| ISO/FDIS 9613-2 (Ed 2) | Acoustics — Attenuation of sound during propagation outdoors — Part 2: Engineering method for the prediction of sound pressure levels outdoors | Technical content of FDIS | 11/12/2023 | Abstain |
| ISO 11654:1997 (vers 4) | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption | Systematic review | 02/12/2023 | Confirm |
| ISO 10846-4:2003 (vers 4) | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion | Systematic review | 02/12/2023 | Abstain |
| ISO 5136:2003 (Ed 2, vers 4) | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method | Systematic review | 02/12/2023 | Confirm |
| ISO 1680:2013 (Ed 2, vers 2) | Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines | Systematic review | 02/12/2023 | Abstain |
| ISO 266:1997 (Ed 2, vers 5) | Acoustics — Preferred frequencies | Systematic review | 02/12/2023 | Confirm |
| ISO/FDIS 15665 (Ed 2) | Acoustics — Acoustic insulation for pipes, valves and flanges | Technical content of FDIS | 13/11/2023 | Abstain |
| ISO 13473-4 | Characterization of pavement texture by use of surface profiles — Part 4: One third octave band spectral analysis of surface profiles | Approve Thomas Lundberg as project leader | 08/11/2023 | Yes |
| ISO/DIS 21388-2 | Acoustics — Hearing Aid Fitting Management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM) | Technical content of DIS | 30/10/2023 | Approve |
| ISO 7029:2017/DAmd 1 (Ed 3) | Acoustics — Statistical distribution of hearing thresholds related to age and gender — Amendment 1: Correction of parameter values for estimating the hearing threshold distribution | Technical content of DAmd | 19/10/2023 | Approve |
| ISO/DIS 3095 (Ed 4) | Railway applications — Acoustics — Measurement of noise emitted by railbound vehicles | Technical content of DIS | 13/10/2023 | Abstain |
| ISO/TC 43/SC 1 | Noise | Comment on VIM CD | 11/10/2023 | No |
| ISO/TC 43 | Acoustics | Comment on VIM CD | 11/10/2023 | No |
| ISO 23591-2 | Acoustic quality criteria for music rehearsal rooms and spaces | PWI for Amd 1 with Kim Youngsun as project leader | 06/10/2023 | Yes |
| ISO/DIS 16254 (Ed 2) | Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method | Technical content of DIS | 03/10/2023 | Abstain |
| ISO/NP 4869-7 | Acoustics — Hearing protectors — Part 7: Method to measure the response of hearing protectors with high-level impulse noise on an acoustic test fixture | New work item proposal | 29/09/2023 | Approve |
| ISO/PWI 18484 | Acoustics — Design process for the acoustic environment of buildings | New work item proposal | 17/09/2023 | Approve |
| ISO/TC 43 | Acoustics | Establish convenors coordination group | 15/09/2023 | Yes |
| ISO/CD 17201-4 | Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound | Comments on CD | 08/09/2023 | No |
| ISO/CD 17201-2 | Acoustics — Noise from shooting ranges — Part 2: Prediction of muzzle blast | Comments on CD | 08/09/2023 | No |
| ISO/DIS 13473-4 | Characterization of pavement texture by use of surface profiles — Part 4: One third octave band spectral analysis of surface profiles | Technical content of DIS | 08/09/2023 | Abstain |
| ISO/TS 13475-2:2000 (vers 5) | Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities | Systematic review | 02/09/2023 | Confirm |
| ISO/TS 13471-1:2017 (vers 2) | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method | Systematic review | 02/09/2023 | Revise |
| ISO/TS 7849-2:2009 (vers 4) | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor | Systematic review | 02/09/2023 | Abstain |
| ISO/TS 7849-1:2009 (vers 4) | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor | Systematic review | 02/09/2023 | Abstain |
| ISO/TS 4869-5:2006 (vers 5) | Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects | Systematic review | 02/09/2023 | Confirm |
| ISO/FDIS 10534-2 (Ed 2) | Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance | Technical content of FDIS | 01/09/2023 | Abstain |
| ISO/FDIS 5128 (Ed 2) | Acoustics — Measurement of interior vehicle noise | Technical content of FDIS | 30/08/2023 | Abstain |
| ISO/PWI TS 12913-4 | Acoustics — Soundscape — Part 4: Design and intervention | New work item proposal | 18/08/2023 | Abstain |
| ISO/CD 13473-5 | Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture | Comments on CD | 11/08/2023 | No |
| ISO/CD 13472-2 | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces | Comments on CD | 11/08/2023 | Yes |
| ISO/DIS 16032 (Ed 2) | Acoustics — Measurement of sound pressure level from service equipment or activities in buildings — Engineering method | Technical content of DIS | 13/07/2023 | Abstain |
| ISO/TC 43/SC 1 | Noise | Liaison with aviation industry | 13/07/2023 | Yes |
| ISO 3822-3:2018 (Ed 3) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances | Systematic review | 04/06/2023 | Abstain |
| ISO/CD 21388-2 | Acoustics — Tele Hearing Aid Fitting Management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM) | Comments on CD | 13/05/2023 | No |
| ISO/PWI 1996-1 | Acoustics – Description, measurement and assessment of environmental noise – Part 1: Basic quantities and assessment procedures | Approve Ken Kaliski as project leader | 27/04/2023 | Yes |
| ISO NP 23351-2 | Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 2: Field method | New work item proposal | 13/04/2023 | Yes |
| ISO/DIS 9612 | Acoustics — Determination of occupational noise exposure — Methodology | Project limit date extension | 12/04/2023 | Yes |
| ISO 7574 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment | Cancel revision; register PWI with Matthew Noble as project leader | 12/04/2023 | Yes |
| ISO/DIS 9612 (Ed 3) | Acoustics — Determination of occupational noise exposure — Methodology | Technical content of DIS | 11/04/2023 | Abstain |
| ISO/TC 160 | Glass in building | Nominate SC2 liaison representative | 03/04/2023 | No |
| ISO/DIS 26101-2 | Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction | Technical content of DIS | 31/03/2023 | Abstain |
| ISO/DIS 3744 | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane | Technical content of DIS | 31/03/2023 | Approve |
| ISO/DIS 5114-1 | Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements | Technical content of DIS | 30/03/2023 | Abstain |
| IEC/TC 29/WG 24 | Modular instrumentation | Nominate SC2 liaison representative | 23/03/2023 | No |
| ISO/DIS 10302-1 (Ed 2) | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement | Technical content of DIS | 20/03/2023 | Abstain |
| ISO/TC 43/SC 1 | Noise | Comment on strategic business plan | 19/03/2023 | No |
| ISO/TC 43 | Acoustics | Comment on strategic business plan | 19/03/2023 | No |
| ISO/TC 43 | Acoustics | Create a category A liaison with SBS | 10/03/2023 | Yes |
| ISO/CD 1999 | Acoustics — Estimation of noise-induced hearing loss | Comments on CD | 08/03/2023 | No |
| ISO 17201-1:2018 (Ed 2) | Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement | Systematic review | 04/03/2023 | Abstain |
| ISO/TS 12913-3:2019 | Acoustics — Soundscape — Part 3: Data analysis | Systematic review | 04/03/2023 | Confirm |
| ISO 3743-2:2018 (Ed 2) | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms | Systematic review | 04/03/2023 | Confirm |
| ISO/DIS 15665 (Ed 2) | Acoustics — Acoustic insulation for pipes, valves and flanges | Technical content of DIS | 02/03/2023 | Abstain |
| ISO/NP 16032 | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method | Nominate experts | 22/02/2023 | No |
| ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender | Start Amd skipping CD with Kenji Kurakata project leader | 19/02/2023 | Yes |
| ISO 354 | Acoustics – Measurement of sound absorption in a reverberation room | Cancel revision project | 17/02/2023 | Yes |
| ISO/DIS 9613-2 (Ed 2) | Acoustics — Attenuation of sound during propagation — Part 2: Engineering method for the prediction of sound pressure levels outdoors | Technical content of DIS | 15/02/2023 | Abstain |
| ISO 11819-2 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method | Confirm; PWI for revision with Ulf Sandberg project leader | 14/02/2023 | Yes |
| ISO/PWI 21388-2 | Acoustics — Tele Hearing Aid Fitting Management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM) | New work item proposal | 09/02/2023 | Approve |
| ISO/FDIS 11819-1 (Ed 2) | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical pass-by method | Technical content of FDIS | 19/01/2023 | Approve |
| ISO/TC 22/SC 39 | Road vehicles – Ergonomics | Liaison with TC43/SC1 | 05/01/2023 | Yes |
| ISO 16032 | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method | Revise with Christian Simmons as project leader | 04/01/2023 | Yes |
| ISO/TC 43/SC 1/WG 64 | Revision of ISO 7574 – Statistical methods for determining and verifying stated noise emission values of machinery and equipment | Nominate experts | 02/01/2023 | No |
| ISO/CD TS 13473-4 | Characterization of pavement texture by use of surface profiles – Part 4: Spectral analysis of surface profiles | Comments on CD | 26/12/2022 | No |
| ISO 13473-4 | Characterization of pavement texture by use of surface profiles – Part 4: Spectral analysis of surface profiles | Extend project limit date | 26/12/2022 | Yes |
| ISO/TS 13473-4 | Characterization of pavement texture by use of surface profiles – Part 4: Spectral analysis of surface profiles | Change from ISO/TC to ISO | 26/12/2022 | Yes |
| ISO/TC 43/SC 1 | Determination of high-frequency sound pressure levels emitted by high-intensity ultrasonic equipment | Change approved WG to JWG with IEC/TC29 | 21/12/2022 | Yes |
| ISO/DIS 10534-2 (Ed 2) | Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance | Technical content of DIS | 08/12/2022 | Abstain |
| ISO 17497-2:2012 (vers 2) | Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field | Systematic review | 02/12/2022 | Confirm |
| ISO 12354-4:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside | Systematic review | 02/12/2022 | Confirm |
| ISO 12354-3:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound | Systematic review | 02/12/2022 | Confirm |
| ISO 12354-2:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms | Systematic review | 02/12/2022 | Confirm |
| ISO 12354-1:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms | Systematic review | 02/12/2022 | Confirm |
| ISO 10848-4:2017 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element | Systematic review | 02/12/2022 | Confirm |
| ISO 10848-3:2017 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence | Systematic review | 02/12/2022 | Confirm |
| ISO 10848-2:2017 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence | Systematic review | 02/12/2022 | Confirm |
| ISO 10848-1:2017 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document | Systematic review | 02/12/2022 | Confirm |
| ISO 9296:2017 (Ed 2) | Acoustics — Declared noise emission values of information technology and telecommunications equipment | Systematic review | 02/12/2022 | Abstain |
| ISO 1996-2:2017 (Ed 3) | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels | Systematic review | 02/12/2022 | Confirm |
| ISO 389-1:2017 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones | Systematic review | 02/12/2022 | Confirm |
| ISO/TC 43/SC 1 | Determination of high-frequency sound pressure | New working group with Takayuki Hoshi as convenor | 11/11/2022 | Yes |
| ISO/TC 43/SC 1 | Determination of high-frequency sound pressure levels emitted by high-intensity ultrasonic equipment | New work item proposal led by Hironobu Takahashi | 11/11/2022 | Yes |
| ISO/DIS 9613-2 | Acoustics — Attenuation of sound during propagation — Part 2: Engineering method for the prediction of sound pressure levels outdoors | Extend project limit date | 11/11/2022 | Yes |
| ISO/TS 15666 | Assessment of noise annoyance by means of social and socio-acoustic surveys | Disband WG62 | 11/11/2022 | Yes |
| ISO/IEC 80000 | Quantities and units | Christopher Struck as TC43 liaison with TC12 and IEC/TC25/JWG2 | 10/11/2022 | Yes |
| ISO/TC 43/SC2 WG27 | Indoor acoustic environment | Reappoint René Gamba as convenor | 03/11/2022 | Yes |
| ISO 15664:2001 | Acoustics — Noise control design procedures for open plant | Revise with Sandra Rodiño Palacios as project leader | 31/10/2022 | Yes |
| ISO/TC 43/SC 2 | Building acoustics | Continue liaison with TC160 with Marc Rehfeld as representative | 20/10/2022 | Yes |
| ISO/FDIS 362-1 (Ed 3) | Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories | Technical content of FDIS | 20/10/2022 | Approve |
| ISO/TC 43/SC1 WG60 | Method for transposition of dynamic forces generated by an active component from a test bench to a vehicle | Disband WG60 | 14/10/2022 | Yes |
| ISO/TC 43/SC1 WG17 | Methods of measurement of sound attenuation of hearing protectors | Disband WG17 and cancel ISO/AWI 4869-7 | 14/10/2022 | Yes |
| ISO/TC 43/SC1 WG57 | In-situ measurements of blocked forces | Appoint Andrew Elliott as convenor | 14/10/2022 | Yes |
| IEC 63143-1 | Electroacoustics – Modular instrumentation for acoustical measurements – Part 1: Specification | Bert van Amerongen as ISO/TC43/SC1 liaison with IEC/TC29/WG24 | 05/10/2022 | Yes |
| ISO/PWI 3382-1 | Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces | New work item proposal | 20/09/2022 | Yes |
| ISO/TC 43/SC 2 | Building acoustics | Reappoint Volker Wittstock as chair | 09/09/2022 | Yes |
| ISO 9052-1:1989 (vers 6) | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings | Systematic review | 02/09/2022 | Confirm |
| ISO 17624:2004 (vers 4) | Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens | Systematic review | 02/09/2022 | Abstain |
| ISO 14257:2001 (vers 4) | Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance | Systematic review | 02/09/2022 | Abstain |
| ISO 14163:1998 (vers 4) | Acoustics — Guidelines for noise control by silencers | Systematic review | 02/09/2022 | Confirm |
| ISO 13475-1:1999 (vers 4) | Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities | Systematic review | 02/09/2022 | Abstain |
| ISO 11957:1996 (vers 5) | Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements | Systematic review | 02/09/2022 | Abstain |
| ISO 11820:1996 (vers 5) | Acoustics — Measurements on silencers in situ | Systematic review | 02/09/2022 | Confirm |
| ISO 11819-2:2017 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method | Systematic review | 02/09/2022 | Revise |
| ISO 11689:1996 (vers 5) | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment | Systematic review | 02/09/2022 | Abstain |
| ISO 11205:2003 (vers 3) | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity | Systematic review | 02/09/2022 | Abstain |
| ISO 11203:1995 (vers 3) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level | Systematic review | 02/09/2022 | Abstain |
| ISO 10846-3:2002 (vers 4) | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion | Systematic review | 02/09/2022 | Abstain |
| ISO 10302-2:2011 (vers 2) | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements | Systematic review | 02/09/2022 | Confirm |
| ISO 7196:1995 (vers 5) | Acoustics — Frequency-weighting characteristic for infrasound measurements | Systematic review | 02/09/2022 | Confirm |
| ISO 5129:2001 (Ed 3, vers 4) | Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight | Systematic review | 02/09/2022 | Abstain |
| ISO 4869-3:2007 (vers 3) | Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture | Systematic review | 02/09/2022 | Confirm |
| ISO 3745:2012 (Ed 3, vers 2)Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms | Systematic review | 02/09/2022 | Confirm | |
| ISO 2923:1996 (Ed 2, vers 5)Acoustics — Measurement of noise on board vessels | Systematic review | 02/09/2022 | Abstain | |
| ISO 28961:2012 (vers 2) | Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions | Systematic review | 02/09/2022 | Confirm |
| ISO 532-2:2017 | Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method | Systematic review | 02/09/2022 | Confirm |
| ISO 532-1:2017 | Acoustics — Methods for calculating loudness — Part 1: Zwicker method | Systematic review | 02/09/2022 | Confirm |
| ISO 389-8:2004 (vers 4) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones | Systematic review | 02/09/2022 | Abstain |
| ISO 16:1975 (vers 7) | Acoustics — Standard tuning frequency (Standard musical pitch) | Systematic review | 02/09/2022 | Confirm |
| ISO/FDIS 362-3 (Ed 2) | Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories | Technical content of FDIS | 31/08/2022 | Abstain |
| ISO 16254 | Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method | Restart revision and skip CD stage | 01/08/2022 | Yes |
| IEC 63143-1 | Electroacoustics – Modular instrumentation for acoustical measurements – Part 1: Specification | Jeff Schmitt as ISO/TC43/SC1 liaison with IEC/TC29 | 28/07/2022 | Yes |
| ISO/DIS 226 (Ed 3) | Acoustics — Normal equal-loudness-level contours | Technical content of DIS | 27/07/2022 | Approve |
| ISO/TC 43/SC 2 | Building acoustics | Reappoint Volker Wittstock as chair | 15/06/2022 | Yes |
| ISO/CD 5305 | Noise measurements for UAS (Unmanned aircraft systems) | Circulation as DIS | 14/06/2022 | Approve |
| ISO 15664:2001 (vers 4) | Acoustics — Noise control design procedures for open plant | Systematic review | 13/06/2022 | Approve |
| ISO 10846-5:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion | Systematic review | 13/06/2022 | Abstain |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion | Systematic review | 13/06/2022 | Abstain |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines | Systematic review | 13/06/2022 | Abstain |
| ISO 9611:1996 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted | Systematic review | 13/06/2022 | Abstain |
| ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender | Systematic review | 13/06/2022 | Confirm |
| ISO/NP TS 16755-1 | Acoustics — Non-acoustic factors — Part 1: Definition and conceptual framework | New work item proposal | 08/06/2022 | Approve |
| ISO 1999 | Acoustics — Estimation of noise-induced hearing loss | New work item proposal | 17/05/2022 | Approve |
| ISO/DIS 532-3 | Acoustics — Methods for calculating loudness — Part 3: Moore-Glasberg-Schlittenlacher method | Technical content of DIS | 12/05/2022 | Abstain |
| ISO/TC 43/SC1 | Acoustics — Non-acoustic factors | New working group with Philip Dunbavin as convenor | 11/05/2022 | Yes |
| ISO/DTS 20065 | Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method | Publication as TS | 03/05/2022 | Approve |
| ISO 10534-2 | Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance | Skip CD stage | 15/04/2022 | Yes |
| ISO/NP 17201-4 | Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound | New work item proposal | 14/04/2022 | Approve |
| ISO 17201-2:2006 | Acoustics — Noise from shooting ranges — Part 2: Estimation of muzzle blast and projectile sound by calculation | Revise | 14/04/2022 | Yes |
| ISO 5128 | Acoustics — Measurement of interior vehicle noise | Appoint Shervin Solhkonan as project leader | 05/04/2022 | Yes |
| ISO 13472-2 | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces | Restart revision | 25/03/2022 | Yes |
| ISO/CD 9612 | Acoustics – Determination of occupational noise exposure – Engineering method | Circulation as DIS | 19/03/2022 | Approve |
| ISO 13473-5:2009 | Characterization of pavement texture by use of surface profiles – Part 5: Determination of megatexture | Revise | 19/03/2022 | Yes |
| ISO/CD 9613-2 | Acoustics — Attenuation of sound during propagation — Part 2: Engineering method for the prediction of sound pressure levels outdoors | Circulation as DIS | 17/03/2022 | Approve |
| ISO/DIS 11819-1 (Ed 2) | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method | Technical content of DIS | 17/03/2022 | Approve |
| ISO 10534-1:1996 (vers 5) | Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 1: Method using standing wave ratio | Systematic review | 13/03/2022 | Confirm |
| ISO 3382-2:2008 (vers 3) | Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms | Systematic review | 13/03/2022 | Confirm |
| ISO/CD 15665 | Acoustics — Acoustic insulation for pipes, valves and flanges | Circulation as DIS | 13/03/2022 | Approve |
| ISO/CD 16254 | Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method | Circulation as DIS | 10/03/2022 | Approve |
| ISO/TC 43 | Acoustics | Establish liaison with IACS | 04/02/2022 | Yes |
| ISO/CD 26101-2 | Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction | Circulation as DIS | 20/02/2022 | Approve |
| ISO/CD 3744 | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane | Circulation as DIS | 20/02/2022 | Approve |
| ISO/CD 5114-1 | Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements | Circulation as DIS | 20/02/2022 | Approve |
| ISO/TS 13471-2 | Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with pass-by methods | Publication as TS | 12/02/2022 | Yes |
| ISO/PAS 1996-3 | Acoustics – Description, measurement and assessment of environmental noise – Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of LAeq | Approval for publication | 15/01/2022 | Yes |
| ISO 17201-4:2006 | Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound | Cancel minor revision, start full revision | 05/01/2022 | Yes |
| ISO/TC 43/SC1 | Determination of high-frequency sound pressure levels emitted by high-intensity ultrasonic equipment | Comments on new work item proposal | 31/12/2021 | No |
| ISO/FDIS 8253-3 (Ed 3) | Acoustics — Audiometric test methods — Part 3: Speech audiometry | Technical content of FDIS | 17/12/2021 | Approve |
| ISO/DIS 5128 (Ed 2) | Acoustics — Measurement of interior vehicle noise | Technical content of DIS | 13/12/2021 | Abstain |
| ISO/FDIS 13472-1 (Ed 2) | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method | Technical content of FDIS | 07/12/2021 | Approve with comments |
| ISO/TC 43/SC1 WG62 | Non-acoustic factors | Secretarial support | 02/12/2021 | No |
| ISO 22955 | Acoustics — Acoustic quality of open office spaces | New work item proposal | 02/12/2021 | Yes |
| ISO/TC 43/SC1 WG65 | Acoustic quality of open office spaces | Appoint Thomas Bonzom as convenor | 02/12/2021 | Yes |
| ISO/TC 43/SC2 WG36 | Room acoustics | Nominate experts | 30/11/2021 | Yes – Yusuke Hioka |
| ISO/TC 43 WG10 | Hearing aid fitting management | Appoint Soo Hee Oh as convenor | 25/11/2021 | Yes |
| ISO 16032 | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method | Appoint Christian Simmons as project leader | 23/11/2021 | Yes |
| ISO/TC 43/SC2 WG35 | Sound absorption | Reappoint Klas Hagberg as convenor | 17/11/2021 | Yes |
| ISO/FDIS 3382-3 (Ed 2) | Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices | Technical content of FDIS | 16/11/2021 | Abstain |
| ISO/FDIS 10844 | Acoustics — Specification of test tracks for measuring sound emitted by road vehicles and their tyres | Technical content of FDIS | 27/10/2021 | Approve |
| ISO/DIS 362-3 (Ed 2) | Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories | Technical content of DIS | 20/09/2021 | Abstain |
| ISO/DIS 362-1 (Ed 3) | Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories | Technical content of DIS | 20/09/2021 | Abstain |
| ISO/TC 43/SC 1 | Strategic Business Plan 2021 | Comments on plan | 13/08/2021 | No |
| ISO/TC 43 | Strategic Business Plan 2021 | Comments on plan | 13/08/2021 | No |
| ISO/FDIS 23591 | Acoustic quality criteria for music rehearsal rooms and spaces | Technical content of FDIS | 12/08/2021 | Approve |
| ISO/FDIS 3381 (Ed 3) | Railway applications — Acoustics — Noise measurement inside railbound vehicles | Technical content of FDIS | 09/08/2021 | Approve |
| ISO/TC 43/SC 1 | Noise | Reappoint D Manvell as chair | 26/07/2021 | Yes |
| ISO/FDIS 21955 | Acoustics — Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure | Technical content of FDIS | 14/07/2021 | Abstain |
| ISO/CD 532-3 | Acoustics — Methods for calculating loudness — Part 3: Moore-Glasberg-Schlittenlacher method for time varying sounds | Circulation as DIS | 13/07/2021 | Abstain |
| ISO 389-3:2016 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators | Systematic review | 04/06/2021 | Confirm |
| ISO 1996-1:2016 (Ed 3) | Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures | Systematic review | 04/06/2021 | Confirm |
| ISO 6926:2016 (Ed 3) | Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | Systematic review | 04/06/2021 | Confirm |
| ISO/TS 12913-2:2018 | Acoustics — Soundscape — Part 2: Data collection and reporting requirements | Systematic review | 04/06/2021 | Abstain |
| ISO 3822-1:1999 (Ed 3, vers 4) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement | Systematic review | 04/06/2021 | Abstain |
| ISO 3822-2:1995 (Ed 2, vers 5) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves | Systematic review | 04/06/2021 | Abstain |
| ISO 15186-1:2000 (vers 4) | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements | Systematic review | 04/06/2021 | Confirm |
| ISO 16283-3:2016 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation | Systematic review | 04/06/2021 | Confirm |
| ISO/FDIS 10052 (Ed 2) | Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method | Technical content of FDIS | 04/06/2021 | Approve |
| ISO/FDIS 17201-6 | Acoustics — Noise from shooting ranges — Part 6: Sound pressure measurements close to the source for determining exposure to sound | Technical content of FDIS | 01/06/2021 | Abstain |
| ISO 226:2003 | Acoustics – Normal equal-loudness-level contours | Cancel minor revision, start full revision | 20/05/2021 | Yes |
| ISO 3382-2 | Acoustics –Measurement of room acoustic parameters –Part 2: Reverberation time in ordinary rooms | New work item proposal | 17/05/2021 | Yes |
| ISO/CD 11819-1 | Acoustics – Measurement of the influence of road surfaces on traffic noise – Part 1: Statistical Pass-By Method | Extend project limit date | 29/04/2021 | Yes |
| ISO/DIS 3382-3 (Ed 2) | Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices | Technical content of DIS | 23/04/2021 | Abstain |
| ISO/TC43/WG10 | Tele Hearing Aid Fitting Management | New work item proposal | 22/04/2021 | Yes |
| ISO 12001 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code | Cancel revision | 19/04/2021 | Yes |
| ISO/FDIS 26101-1 | Acoustics – Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments | Technical content of FDIS | 13/04/2021 | Approve |
| ISO 362-1 and ISO 362-3 | Measurement of noise emitted by accelerating road vehicles — Engineering method | Skip CD stage | 08/04/2021 | Yes |
| ISO/DPAS 1996-3 | Acoustics – Description, measurement and assessment of environmental noise – Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of LAeq | Publication as PAS | 07/04/2021 | Yes with comments |
| ISO 389-3:2016 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators | Cancel Amd1 | 06/04/2021 | Yes |
| ISO/FDIS 10140-1 (Ed 3) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products | Technical content of FDIS | 31/03/2021 | Approve |
| ISO/TC 20/SC 16 | Noise measurement of lightweight and small multirotor unmanned aircraft systems (UAS) | Establish JWG | 31/03/2021 | Yes |
| ISO/FDIS 22955 | Acoustics — Acoustic quality of open office spaces | Technical content of FDIS | 29/03/2021 | Disapprove |
| ISO/FDIS 10140-5 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment | Technical content of FDIS | 23/03/2021 | Approve |
| ISO/FDIS 10140-4 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Technical content of FDIS | 23/03/2021 | Approve with comments |
| ISO/FDIS 10140-3 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation | Technical content of FDIS | 23/03/2021 | Approve |
| ISO/FDIS 10140-2 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation | Technical content of FDIS | 23/03/2021 | Approve |
| ISO 8297:1994/FDAmd 1 | Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method — Amendment 1 | Technical content of FDAmd | 23/03/2021 | Approve |
| ISO/DIS 10844 (Ed 4) | Acoustics — Specification of test tracks for measuring sound emitted by road vehicles and their tyres | Technical content of DIS | 10/03/2021 | Approve |
| ISO 18233:2006 (vers 3) | Acoustics — Application of new measurement methods in building and room acoustics | Systematic review | 04/03/2021 | Confirm |
| ISO 16032:2004 (vers 3) | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method | Systematic review | 04/03/2021 | Confirm |
| ISO 3382-1:2009 (vers 2) | Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces | Systematic review | 04/03/2021 | Confirm |
| ISO/DIS 8253-3 (Ed 3) | Acoustics — Audiometric test methods — Part 3: Speech audiometry | Technical content of DIS | 02/03/2021 | Approve |
| ISO/DTS 13471-2 | Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods | Publication as TS | 27/02/2021 | Approve |
| ISO/DIS 13472-1 (Ed 2) | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method | Technical content of DIS | 18/02/2021 | Approve |
| ISO/WD PAS 13473-6 | Characterization of pavement texture by use of surface profiles — Part 6: Verification of the performance of laser profilometers used for pavement texture measurements | Publication as PAS | 16/02/2021 | Approve |
| ISO/FDIS 11904-2 (Ed 2) | Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin | Technical content of FDIS | 08/02/2021 | Approve |
| ISO/PWI 5114-1.2 | Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements | New work item proposal | 26/01/2021 | Approve |
| ISO/PWI 26101-2.2 | Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction | New work item proposal | 26/01/2021 | Approve |
| ISO/TC 20/SC 16 | General requirement of noise measurement of lightweight and small multirotor unmanned aircraft systems (UAS) | Liaison with WG5 | 22/01/2021 | Yes |
| ISO/TC43/SC1/WG63 | Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours | Disband WG63 | 21/01/2021 | Yes |
| ISO/CD 7574.2 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment | Circulation as DIS | 20/01/2021 | Approve |
| ISO/DIS 23591 | Acoustic quality criteria for music rehearsal rooms and spaces | Technical content of DIS | 06/01/2021 | Approve |
| ISO/DIS 21955 | Acoustics — Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure | Technical content of DIS | 18/12/2020 | Abstain |
| ISO 389-4:1994 (vers 5) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 4: Reference levels for narrow-band masking noise | Systematic review | 02/12/2020 | Confirm |
| ISO 389-6:2007 (vers 3) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 6: Reference threshold of hearing for test signals of short duration | Systematic review | 02/12/2020 | Confirm |
| ISO 8253-1:2010 (Ed 2, vers 2) | Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry | Systematic review | 02/12/2020 | Confirm |
| ISO 3741:2010 (Ed 4, vers 2) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms | Systematic review | 02/12/2020 | Confirm |
| ISO 3743-1:2010 (Ed 2, vers 2) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room | Systematic review | 02/12/2020 | Confirm |
| ISO 3746:2010 (Ed 3, vers 2) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane | Systematic review | 02/12/2020 | Confirm |
| ISO 3747:2010 (Ed 3, vers 2) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment | Systematic review | 02/12/2020 | Confirm |
| ISO 9613-1:1993 (vers 5) | Acoustics — Attenuation of sound during propagation outdoors — Part 1: Calculation of the absorption of sound by the atmosphere | Systematic review | 02/12/2020 | Confirm |
| ISO 11201:2010 (Ed 2, vers 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections | Systematic review | 02/12/2020 | Abstain |
| ISO 11202:2010 (Ed 2, vers 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections | Systematic review | 02/12/2020 | Abstain |
| ISO 11204:2010 (Ed 2, vers 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections | Systematic review | 02/12/2020 | Abstain |
| ISO 11546-1:1995 (vers 5) | Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) | Systematic review | 02/12/2020 | Abstain |
| ISO 11546-2:1995 (vers 5) | Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) | Systematic review | 02/12/2020 | Abstain |
| ISO 15667:2000 (vers 4) | Acoustics — Guidelines for noise control by enclosures and cabins | Systematic review | 02/12/2020 | Abstain |
| ISO 17201-5:2010 (vers 2) | Acoustics — Noise from shooting ranges — Part 5: Noise management | Systematic review | 02/12/2020 | Confirm |
| ISO/TC 43/SC 3 | Underwater acoustics | Appoint S Robinson as chair | 27/11/2020 | Yes |
| ISO 10053:1991 | Acoustics — Measurement of office screen sound attenuation under specific laboratory conditions | Withdraw | 26/11/2020 | Approve |
| ISO/FDIS 717-2 (Ed 4) | Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Technical content of FDIS | 11/11/2020 | Approve |
| ISO/FDIS 717-1 (Ed 4) | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation | Technical content of FDIS | 11/11/2020 | Approve |
| ISO/FDIS 2922 (Ed 3) | Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours | Technical content of FDIS | 09/11/2020 | Approve |
| ISO 17201-6 | Acoustics – Noise from shooting ranges – Part 6: Sound exposure at close range of the sound source | Extend revision limit date | 23/10/2020 | Yes |
| ISO 6926:2016/FDAmd 1 (Ed 3) | Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels — Amendment 1 | Technical content of FDIS | 27/10/2020 | Approve |
| ISO/DIS 10052 (Ed 2) | Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method | Technical content of DIS | 20/10/2020 | Approve |
| ISO/NP 4869-7 | Acoustics — Hearing protectors — Part 7: Method to measure the response of hearing protectors with high-level impulse noise on an acoustic test fixture | New work item proposal | 19/10/2020 | Approve |
| ISO/TC43/SC1/WG17 | Methods of measurement of sound attenuation of hearing protectors | Appoint W Murphy as convenor | 19/10/2020 | Yes |
| ISO/CD TS 19488 | Acoustics — Acoustic classification of dwellings | Publication as TS | 14/10/2020 | Approve with comments |
| ISO/CD 10302-1 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement | Restart revision | 25/09/2020 | Yes |
| ISO/NP 26101-2 | Acoustics – Test methods for the qualification of the acoustic environment – Part 2: Determination of the environmental correction | New work item proposal | 25/09/2020 | Approve |
| ISO/NP 5114-1 (Ed 2) | Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements | New work item proposal | 25/09/2020 | Approve |
| ISO/PWI 3744 (Ed 4) | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane | New work item proposal | 25/09/2020 | Approve |
| ISO 26101 | Acoustics – Test methods for the qualification of the acoustic environment – Part 1: Qualification of free-field environment | Minor revision | 25/09/2020 | Yes |
| ISO/TC43/SC1/WG27 | Effect of temperature on tyre/road noise testing | Appoint E Bühlmann as convenor | 23/09/2020 | Yes |
| ISO/TC43/SC1/WG33 | Measuring method for comparing traffic noise on different road surfaces | Appoint F Anfosso-Ledée as convenor | 23/09/2020 | Yes |
| ISO/TC43/SC1/WG39 | Characterization of pavement texture using surface profiles | Appoint T Lundberg as convenor | 23/09/2020 | Yes |
| ISO/DTS 11819-3 | Acoustics — Measurement of the influence of road surfaces on traffic noise – Part 3: Reference tyres | Publication as TS | 16/09/2020 | Approve |
| ISO/PWI 10534-2 (Ed 2) | Acoustics — Determination of properties in impedance tubes — Part 2: 2-microphone technique for normal sound absorption coefficient and normal surface impedance | New work item proposal | 16/09/2020 | Approve |
| ISO/FDIS 11690-2 (Ed 2) | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures | Technical content of FDIS | 16/09/2020 | Abstain |
| ISO/FDIS 11690-1 (Ed 2) | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies | Technical content of FDIS | 16/09/2020 | Abstain |
| ISO 10053 | Acoustics — Measurement of office screen sound attenuation under specific laboratory conditions | Withdraw | 14/09/2020 | Yes |
| ISO/DIS 10140-1 (Ed 3) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products | Technical content of DIS | 11/09/2020 | Approve with comments |
| ISO/DIS 10140-2 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation | Technical content of DIS | 11/09/2020 | Approve with comments |
| ISO/DIS 10140-3 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation | Technical content of DIS | 11/09/2020 | Approve with comments |
| ISO/DIS 10140-4 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Technical content of DIS | 11/09/2020 | Approve with comments |
| ISO/DIS 10140-5 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment | Technical content of DIS | 11/09/2020 | Approve with comments |
| ISO/FDIS 9053-2 | Acoustics — Determination of airflow resistance — Part 2: Alternating airflow method | Technical content of FDIS | 21/08/2020 | Approve |
| ISO/PAS 20065 | Acoustics – Objective method for assessing the audibility of tones in noise – Engineering method | Convert to a TS | 20/07/2020 | Yes |
| ISO/CD TS 15666 | Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys | Publication of draft | 15/07/2020 | Approve |
| ISO/PWI TS 12913-4 | Guidelines for the assessment of soundscape investigation results | Registration of PWI | 15/07/2020 | Yes |
| ISO 11202:2010/FDAmd 1 (Ed 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections — Amendment 1 | Technical content of FDAmd | 07/07/2020 | Approve |
| ISO/FDIS 5135 (Ed 3) | Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room | Technical content of FDIS | 06/07/2020 | Approve |
| ISO/FDIS 23351-1 | Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 1: Laboratory method | Technical content of FDIS | 08/06/2020 | Abstain |
| TC43/SC2 | Liaison between ISO/TC 43/SC 2 and Small Business Standards | Approval of liaison | 05/06/2020 | No |
| ISO/FDIS 12999-2 | Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption | Technical content of FDIS | 04/06/2020 | Abstain |
| ISO/CD 11819-1 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method | Circulation as DIS | 03/06/2020 | Approve with comments |
| ISO/CD 7574 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment | Circulation as DIS | 26/05/2020 | Approve |
| ISO 26101 | Acoustics — Test methods for the qualification of free-field environments | Transfer to TC43/SC1 | 22/05/2020 | Yes |
| ISO/CD 23591 | Acoustic quality criteria for music rehearsal rooms and spaces | Circulation as DIS | 13/05/2020 | Approve |
| ISO 9613-2 | Acoustics – Attenuation of sound during propagation – Part 2: Engineering method for the prediction of sound pressure levels outdoors | Revision | 21/04/2020 | Yes |
| ISO 362-3:2016 | Acoustics – Measurement of noise emitted by accelerating road vehicles – Engineering method – Part 3: Indoor testing M and N categories | Comments on CD | 16/04/2020 | No |
| ISO 362-3:2016 | Acoustics – Measurement of noise emitted by accelerating road vehicles – Engineering method – Part 3: Indoor testing M and N categories | Revision | 16/04/2020 | Yes |
| ISO 389-3:2016/DAmd 1 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators — Amendment 1 | Technical content of DAmd | 04/05/2020 | Approve with comments |
| ISO/NP PAS 13473-6 | Characterization of pavement texture by use of surface profiles — Part 6: Verification of the performance of laser profilometers used for pavement texture measurements | New work item proposal | 28/04/2020 | Approve |
| ISO/DIS 22955 | Acoustics — Acoustic quality of open office spaces | Technical content of DIS | 23/04/2020 | Abstain |
| ISO/PWI 18484 | Acoustics – Indoor acoustic environment | Re-install PWI | 11/04/2020 | Yes |
| ISO/NP TS 13471-2 | Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods | New work item proposal | 10/04/2020 | Approve |
| ISO/DIS 9053-2 | Acoustics — Determination of airflow resistance — Part 2: Alternating airflow method | Technical content of DIS | 02/04/2020 | Approve |
| ISO/CD 3382-3.2 | Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices | Circulation as DIS | 27/03/2020 | Approve |
| ISO/DIS 17201-6 | Acoustics — Noise from shooting ranges — Part 6: Sound exposure at close range of the sound source | Technical content of DIS | 24/03/2020 | Abstain |
| ISO/DIS 717-2 (Ed 4) | Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Technical content of DIS | 23/03/2020 | Approve |
| ISO/FDIS 11691 (Ed 2) | Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method | Technical content of FDIS | 16/03/2020 | Approve |
| ISO/DIS 717-1 (Ed 4) | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation | Technical content of DIS | 12/03/2020 | Approve |
| ISO 362-1 | Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories | Revision | 05/03/2020 | Yes |
| ISO/CD 1084 | Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres | Circulation as DIS | 05/03/2020 | Yes |
| ISO 17534-1:2015 | Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance | Systematic review | 03/03/2020 | Confirm |
| ISO/TS 13475-2:2000 (vers 4) | Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities | Systematic review | 03/03/2020 | Confirm |
| ISO/TS 13471-1:2017 | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method | Systematic review | 03/03/2020 | Confirm |
| ISO/TS 11819-3:2017 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres | Systematic review | 03/03/2020 | Confirm |
| ISO 9295:2015 | Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment | Systematic review | 03/03/2020 | Confirm |
| ISO/TS 7849-2:2009 (vers 3) | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor | Systematic review | 03/03/2020 | Abstain |
| ISO/TS 7849-1:2009 (vers 3) | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor | Systematic review | 03/03/2020 | Abstain |
| ISO/TS 4869-5:2006 (vers 4) | Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects | Systematic review | 03/03/2020 | Confirm |
| ISO 1683:2015 | Acoustics — Preferred reference values for acoustical and vibratory levels | Systematic review | 03/03/2020 | Yes |
| ISO 7574 series | Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment | Combine into single-part | 13/02/2020 | Yes |
| ISO 16254 | Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method | Revision | 12/02/2020 | Yes |
| ISO/FDIS 21388 | Acoustics — Hearing aid fitting management (HAFM) | Technical content of FDIS | 11/02/2020 | Approve |
| ISO/CD 354 | Acoustics — Measurement of sound absorption in a reverberation room | Circulation as DIS | 31/01/2020 | Disapprove |
| ISO/CD 5128 | Acoustics — Measurement of noise inside motor vehicles | Circulation as DIS | 29/01/2020 | Approve |
| ISO 8297:1994/DAmd 1 | Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method — Amendment 1 | Technical content of DAmd | 16/01/2020 | Approve |
| ISO 6926:2016/DAmd 1 (Ed 3) | Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels — Amendment 1 | Technical content of DAmd | 08/01/2020 | Approve |
| ISO/DIS 10848-5 | Acoustics — Laboratory and field measurement of the flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 5: Radiation efficiencies of building elements | Technical content of DIS | 07/01/2020 | Approve |
| ISO/FDIS 80000-8.2 | Quantities and units – Part 8: Acoustics | Comments | 06/01/2020 | No |
| ISO/DIS 16283-2 (Ed 3) | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Technical content of DIS | 03/01/2020 | Approve |
| ISO/DIS 3381 (Ed 3) | Railway applications — Acoustics — Noise measurement inside railbound vehicles | Technical content of DIS | 25/12/2019 | Approve |
| ISO 16251-1:2014 | Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor | Systematic review | 02/12/2019 | Confirm |
| ISO 10053:1991 (vers 5) | Acoustics — Measurement of office screen sound attenuation under specific laboratory conditions | Systematic review | 02/12/2019 | Abstain |
| ISO 20906:2009 (vers 2) | Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports | Systematic review | 02/12/2019 | Confirm |
| ISO/PAS 20065:2016 | Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method | Systematic review | 02/12/2019 | Confirm |
| ISO 17201-4:2006 (vers 3) | Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound | Systematic review | 02/12/2019 | Abstain |
| ISO 13474:2009 (vers 2) | Acoustics — Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment | Systematic review | 02/12/2019 | Abstain |
| ISO 13473-5:2009 (vers 2) | Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture | Systematic review | 02/12/2019 | Confirm |
| ISO/TS 13473-4:2008 (vers 2) | Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles | Systematic review | 02/12/2019 | Confirm |
| ISO 12913-1:2014 | Acoustics — Soundscape — Part 1: Definition and conceptual framework | Systematic review | 02/12/2019 | Abstain |
| ISO 11200:2014 (Ed 2) | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | Systematic review | 02/12/2019 | Abstain |
| ISO 10844:2014 (Ed 3) | Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres | Systematic review | 02/12/2019 | Confirm |
| ISO 9612:2009 (Ed 2, vers 2) | Acoustics — Determination of occupational noise exposure — Engineering method | Systematic review | 02/12/2019 | Confirm |
| ISO 362-2:2009 (vers 2) | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 2: L category | Systematic review | 02/12/2019 | Confirm |
| ISO 16832:2006 (vers 3) | Acoustics — Loudness scaling by means of categories | Systematic review | 02/12/2019 | Confirm |
| ISO 11904-2:2004 (vers 3) | Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin | Systematic review | 02/12/2019 | Confirm |
| ISO 8253-2:2009 (Ed 2, vers 2) | Acoustics — Audiometric test methods — Part 2: Sound field audiometry with pure-tone and narrow-band test signals | Systematic review | 02/12/2019 | Confirm |
| ISO 389-9:2009 (vers 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 9: Preferred test conditions for the determination of reference hearing threshold levels | Systematic review | 02/12/2019 | Confirm |
| ISO 389-5:2006 (vers 3) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz | Systematic review | 02/12/2019 | Confirm |
| ISO 389-2:1994 (vers 4) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones | Systematic review | 02/12/2019 | Confirm |
| ISO 226:2003 (Ed 2, vers 3) | Acoustics — Normal equal-loudness-level contours | Systematic review | 02/12/2019 | Confirm |
| ISO 11203:1995/FDAmd 1 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level — Amendment 1 | Technical content of FDAmd | 29/11/2019 | Approve |
| ISO/CD 8253-3 | Acoustics — Audiometric test methods — Part 3: Speech audiometry | Circulation as DIS | 18/11/2019 | Approve with comments |
| ISO/CD 21955 | Vehicles — Experimental method for transposition of dynamic forces generated by an active component from a test bench to a vehicle | Circulation as DIS | 31/10/2019 | Abstain |
| ISO 10844:2014 | Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres | Revise not amend | 23/10/2019 | Yes |
| ISO/CD 10844 | Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres | Comments on CD | 23/10/2019 | No |
| ISO/DIS 2922 (Ed 3) | Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours | Technical content of DIS | 15/10/2019 | Approve |
| ISO/FDIS 20270 | Acoustics — Characterization of sources of structure-borne sound and vibration — Indirect measurement of blocked forces | Technical content of FDIS | 06/10/2019 | Abstain |
| ISO/CD 9053-2 | Acoustics — Determination of airflow resistance — Part 2: Alternating airflow method | Circulation as DIS | 04/10/2019 | Approve |
| ISO/DIS 12999-2 | Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption | Technical content of DIS | 03/10/2019 | Abstain |
| ISO/CD 10052.3 | Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method | Circulation as DIS | 20/09/2019 | Approve |
| ISO/NP 11690-3 | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 3: Engineering method for the prediction of sound indoors | New work item proposal | 19/09/2019 | Approve |
| ISO/TC43/SC1/WG | Recommended practice for the design of low-noise and acoustically optimized workplaces (Revision of ISO 11690-3) | New working group | 19/09/2019 | Yes |
| ISO/FDIS 389-7 (Ed 3) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions | Technical content of FDIS | 19/09/2019 | Approve |
| ISO/CD 22955 | Acoustics — Acoustic quality of open office spaces | Circulation as DIS | 18/09/2019 | Disapprove |
| ISO/DIS 23351-1 | Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 1: Laboratory method | Technical content of DIS | 12/09/2019 | Abstain |
| ISO 10140-5 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment | Revision | 09/09/2019 | Yes |
| ISO 10140-4 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Revision | 09/09/2019 | Yes |
| ISO 10140-3 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation | Revision | 09/09/2019 | Yes |
| ISO 10140-2 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation | Revision | 09/09/2019 | Yes |
| ISO 10140-1 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products | Revision | 09/09/2019 | Yes |
| ISO 9052-1 | Acoustics – Determination of dynamic stiffness – Part 1: Materials used under floating floors in dwellings | Cancel revision project | 05/09/2019 | Yes |
| ISO/FDIS 80000-8 | Quantities and units – Acoustics | Comments on FDIS | 18/08/2019 | No |
| ISO/DIS 5135 (Ed 3) | Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room | Technical content of DIS | 16/08/2019 | Approve |
| ISO 11202:2010/DAmd 1 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections — Amendment 1 | Technical content of DAmd | 14/08/2019 | Approve |
| ISO/DIS 11691 (Ed 2) | Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method | Technical content of DIS | 03/07/2019 | Approve |
| ISO/DTR 17534-4 | Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for quality assured implementation of CNOSSOS EU calculation methods in software according to ISO 17534-1 | Publication of TR | 19/06/2019 | Approve |
| ISO 9052-1 | Acoustics – Determination of dynamic stiffness – Part 1: Materials used under floating floors in dwellings | Call for project leader | 14/06/2019 | No |
| ISO/FDIS 5130 (Ed 3) | Acoustics — Measurements of sound pressure level emitted by stationary road vehicles | Technical content of FDIS | 14/06/2019 | Approve |
| ISO/DIS 12999-1 (Ed 2) | Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation | Technical content of DIS | 03/06/2019 | Approve |
| ISO/DTS 12913-3 | Acoustics — Soundscape — Part 3: Data Analysis | Publication of TS | 22/05/2019 | Abstain |
| ISO/TC 43/SC 2/WG 27 | Indoor acoustic environment | Appoint R Gamba as convenor | 15/05/2019 | Yes |
| ISO/CD 17201-6 | Acoustics — Noise from shooting ranges — Part 6: Sound exposure at close range of the sound source | Circulation as DIS | 26/04/2019 | Disapprove |
| ISO 16283-1:2014 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation | Systematic review | 04/06/2019 | Confirm |
| ISO/NP TS 19488 | Acoustics — Acoustic classification of dwellings | New work item proposal | 11/03/2019 | Approve |
| ISO/CD 717-1.2 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation | Circulation as DIS | 07/03/2019 | Approve |
| ISO 15186-3:2002 (vers 3) | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 3: Laboratory measurements at low frequencies | Systematic review | 04/03/2019 | Abstain |
| ISO 15186-2:2003 (vers 3) | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 2: Field measurements | Systematic review | 04/03/2019 | Abstain |
| ISO 3822-4:1997 (Ed 2, vers 4) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances | Systematic review | 04/03/2019 | Abstain |
| ISO 11202:2010/CD Amd 1 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections — Amendment 1 | Circulation as DIS | 01/02/2019 | Approve |
| ISO/DIS 21388 | Hearing aid fitting management (HAFM) | Technical content of DIS | 29/01/2019 | Approve with comments |
| ISO/DIS 20270 | Acoustics — Characterization of sources of structure-borne sound and vibration — Indirect measurement of blocked forces | Technical content of DIS | 28/01/2019 | Abstain |
| ISO/NP PAS 1996-3 | Acoustics — Description, measurement and assessment of environmental noise — Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of LAeq | New work item proposal | 15/01/2019 | Approve |
| ISO/FDIS 3740 (Ed 3) | Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards | Technical content of FDIS | 31/12/2018 | Approve |
| ISO/FDIS 4869-6 | Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs | Technical content of FDIS | 26/12/2018 | Abstain |
| ISO/FDIS 13473-1 (Ed 2) | Characterization of pavement texture by use of surface profiles — Part 1: Determination of mean profile depth | Technical content of FDIS | 19/12/2018 | Approve |
| ISO/FDIS 17201-3 (Ed 2) | Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations | Technical content of FDIS | 18/12/2018 | Approve |
| ISO/CD 10848-5 | Acoustics — Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms — Part 5: Radiation efficiencies of building elements | Circulation as DIS | 07/12/2018 | Approve |
| ISO/NP 23708 | Acoustics — Determination of airflow resistance | New work item proposal | 03/12/2018 | Abstain |
| ISO/CD 717-2.2 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Circulation as DIS | 02/11/2018 | Approve |
| ISO/CD 12999-2 | Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption coefficients | Circulation as DIS | 02/11/2018 | Disapprove |
| ISO/FDIS 20189 | Acoustics — Screens, furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements | Technical content of FDIS | 31/10/2018 | Approve |
| ISO/FDIS 7779 (Ed 4) | Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment | Technical content of FDIS | 25/10/2018 | Abstain |
| ISO/FDIS 19488 | Acoustics — Acoustic classification of dwellings | Technical content of FDIS | 24/10/2018 | Abstain |
| ISO/NP TS 12913-3 | Acoustics — Soundscape — Part 3: Data Analysis | New work item proposal | 23/10/2018 | Abstain |
| ISO/NP 532-3 | Acoustics — Methods for calculating loudness — Part 3: Moore-Glasberg method for time varying sounds | New work item proposal | 20/10/2018 | Approve |
| ISO/CD 23351 | Acoustics — Measurement of speech reduction index of furniture ensembles | Circulation as DIS | 19/10/2018 | Approve |
| ISO/FDIS 17201-1 (Ed 2) | Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement | Technical content of FDIS | 12/10/2018 | Approve |
| ISO/CD 11691 | Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method | Circulation as DIS | 12/10/2018 | Approve |
| ISO/CD 5135 | Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room | Circulation as DIS | 12/10/2018 | Approve |
| ISO/CD 2922 | Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours | Circulation as DIS | 12/10/2018 | Approve |
| ISO/FDIS 9053 (Ed 2) | Acoustics — Determination of static airflow resistance | Technical content of FDIS | 02/10/2018 | Abstain |
| ISO 9053 | Acoustics – Determination of airflow resistance | Change numbering | 30/09/2018 | Yes |
| ISO 354:2003 | Acoustics – Measurement of sound absorption in a reverberation room | Revise | 30/09/2018 | Yes |
| ISO/NP 23591 | Acoustic quality criteria for music rehearsal rooms and spaces | New work item proposal | 11/09/2018 | Approve |
| ISO/TC 43/SC 1/WG 45 | Description and measurement of environmental noise | Appoint Mr D Manvell as convenor | 20/07/2018 | Yes |
| ISO/CD 21388 | Acoustics — Hearing aid fitting management | Circulation as DIS | 27/07/2018 | Approve |
| ISO 11203:1995/DAmd 1 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level — Amendment 1 | Technical content of DAmd | 19/07/2018 | Approve |
| ISO/DIS 5130 (Ed 3) | Acoustics — Measurements of sound pressure level emitted by stationary road vehicles | Technical content of DIS | 19/07/2018 | Approve |
| ISO 10052:2004-12 + AMD 1 | Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method | Revision | 09/07/2018 | Yes |
| ISO 266:1997 | Acoustics — Preferred frequencies | Systematic review | 04/06/2018 | Confirm |
| ISO 389-7:2005 | Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions | Systematic review | 04/06/2018 | Confirm |
| ISO 1999:2013 | Acoustics — Estimation of noise-induced hearing loss | Systematic review | 04/06/2018 | Revise |
| ISO 11904-1:2002 | Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique) | Systematic review | 04/06/2018 | Confirm |
| ISO 1680:2013 | Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines | Systematic review | 04/06/2018 | Abstain |
| ISO 3095:2013 | Acoustics — Railway applications — Measurement of noise emitted by railbound vehicles | Systematic review | 04/06/2018 | Confirm |
| ISO 3381:2005 | Railway applications — Acoustics — Measurement of noise inside railbound vehicles | Systematic review | 04/06/2018 | Confirm |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment | Systematic review | 04/06/2018 | Abstain |
| ISO 5128:1980 | Acoustics — Measurement of noise inside motor vehicles | Systematic review | 04/06/2018 | Abstain |
| ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method | Systematic review | 04/06/2018 | Confirm |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss | Systematic review | 04/06/2018 | Confirm |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points | Systematic review | 04/06/2018 | Confirm |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning | Systematic review | 04/06/2018 | Confirm |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning | Systematic review | 04/06/2018 | Confirm |
| ISO 9645:1990 | Acoustics — Measurement of noise emitted by two-wheeled mopeds in motion — Engineering method | Systematic review | 04/06/2018 | Abstain |
| ISO 10843:1997 | Acoustics — Methods for the description and physical measurement of single impulses or series of impulses | Systematic review | 04/06/2018 | Abstain |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion | Systematic review | 04/06/2018 | Confirm |
| ISO 10847:1997 | Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types | Systematic review | 04/06/2018 | Abstain |
| ISO 11819-1:1997 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method | Systematic review | 04/06/2018 | Confirm |
| ISO 11821:1997 | Acoustics — Measurement of the in situ sound attenuation of a removable screen | Systematic review | 04/06/2018 | Abstain |
| ISO 13472-2:2010 | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces | Systematic review | 04/06/2018 | Confirm |
| ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis | Systematic review | 04/06/2018 | Confirm |
| ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers | Systematic review | 04/06/2018 | Confirm |
| ISO 15665:2003 | Acoustics — Acoustic insulation for pipes, valves and flanges | Systematic review | 04/06/2018 | Confirm |
| ISO 17497-1:2004 | Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room | Systematic review | 04/06/2018 | Confirm |
| ISO/DIS 11654.2 (Ed 2) | Acoustics — Sound absorbers — Rating of sound absorption coefficients | Technical content of DIS | 29/05/2018 | Disapprove |
| ISO 9053 | Acoustics – Determination of static airflow resistance | Change title and scope | 23/05/2018 | Yes |
| ISO/NP 12999-2 | Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption coefficients | New work item proposal | 15/05/2018 | Disapprove |
| ISO 6242-3:1992 | Building construction — Expression of users’ requirements — Part 3: Acoustical requirements | Withdrawal of ISO | 10/05/2018 | Approve |
| ISO 11200:2014/FDAmd 1 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Amendment 1 | Technical content of FDAmd | 09/05/2018 | Approve |
| ISO/FDIS 4869-1 | Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation | Technical content of FDIS | 22/03/2018 | Approve |
| ISO/FDIS 4869-2 | Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn | Technical content of FDIS | 22/03/2018 | Approve |
| ISO/NP 23351 | Acoustics — Measurement of speech reduction index of furniture ensembles | Approval of NWIP | 10/04/2018 | Approve |
| ISO/PWI 717-2 | Acoustics – Rating of sound insulation in buildings and of building elements – Part 2: Impact sound insulation | Activate PWI | 10/04/2018 | Yes |
| ISO/FDIS 17201-3 | Acoustics – Noise from shooting ranges – Part 3: Guidelines for sound propagation calculations | Layout of FDIS | 15/03/2018 | Yes |
| ISO/CD 21388 | Acoustics – Hearing aid fitting management | Comments on CD | 10/03/2018 | No |
| ISO 6242-3 | Building construction — Expression of users’ requirements — Part 3: Acoustical requirements | Systematic review | 05/03/2018 | Withdraw |
| ISO 10302-1 | Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices – Part 1: Airborne noise measurement | Revision skipping CD | 01/03/2018 | Yes |
| ISO/DTS 12913-2 | Acoustics – Soundscape – Part 2: Data collection and reporting requirements | Publication as TS | 12/02/2018 | Yes |
| ISO/TC 43/SC 3 | Underwater acoustics | Re-appointment of G Frisk as Chair | 31/12/2017 | Yes |
| ISO/DIS 9053 (Ed 2) | Acoustics — Determination of static airflow resistance | Technical content of DIS | 20/02/2018 | Abstain |
| ISO/FDIS 3743-2 (Ed 2) | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms | Technical content of FDIS | 28/12/2017 | Approve |
| ISO/DIS 20189 | Acoustics — Screens furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements | Technical content of DIS | 27/12/2017 | Approve |
| ISO/DIS 11654 (Ed 2) | Acoustics — Sound absorbers — Rating of sound absorption coefficients | Technical content of DIS | 27/12/2017 | Approve with comments |
| ISO/NP 10848-5 | Acoustics — Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms — Part 5: Radiation efficiencies of building elements | New work item proposal | 21/12/2017 | Approve |
| ISO/DIS 7779 (Ed 4) | Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment | Technical content of DIS | 20/12/2017 | Abstain |
| ISO/FDIS 3822-3 (Ed 3) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances | Technical content of FDIS | 01/12/2017 | Abstain |
| ISO/DIS 19488 | Acoustics — Acoustic classification of dwellings | Technical content of DIS | 06/12/2017 | Approve with comments |
| ISO/DIS 16283-2 (Ed 2) | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Technical content of DIS | 19/11/2017 | Approve |
| ISO/FDIS 389-1 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones | Technical content of FDIS | 14/11/2017 | Approve |
| ISO/DIS 17201-1 (Ed 2) | Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement | Technical content of DIS | 07/11/2017 | Abstain |
| ISO/TC 43/SC 1 | Acoustic quality of open office space | New WG with convenor Y Le Muet | 03/10/2017 | No |
| ISO/NP 22955 | Acoustics — Acoustic quality of open office spaces | New work item proposal | 03/10/2017 | Disapprove |
| ISO/DIS 3740 (Ed 3) | Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards | Technical content of DIS | 02/10/2017 | Approve |
| ISO/DIS 13473-1 (Ed 2) | Characterization of pavement texture by use of surface profiles — Part 1: Determination of mean profile depth | Technical content of DIS | 02/10/2017 | Abstain |
| ISO/CD 20270 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Indirect in situ measurement of blocked forces at the contact points of machinery and equipment | Circulation as DIS | 30/09/2017 | Abstain |
| ISO 21388 | Acoustics — Hearing aid fitting management | Merge Parts 1 & 2 | 10/09/2017 | Yes |
| ISO 16283-1:2014/FDAmd 1 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation — Amendment 1 | Technical content of FDIS | 16/08/2017 | Approve |
| ISO/FDIS 10848-1 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document | Technical content of FDIS | 24/07/2017 | Approve |
| ISO 17497-2:2012 | Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field | Systematic review | 04/09/2017 | Confirm |
| ISO/DIS 12913-2 | Acoustics — Soundscape — Part 2: Data collection and reporting requirements | Technical content of DIS | 10/07/2017 | Disapprove |
| ISO/FDIS 9296 (Ed 2) | Acoustics — Declared noise emission values of information technology and telecommunications equipment | Technical content of FDIS | 15/06/2017 | Abstain |
| ISO/CD 7779 | Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment | Circulation as DIS | 08/06/2017 | Abstain |
| ISO 3382-3:2012 | Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices | Systematic review | 05/06/2017 | Confirm |
| ISO/CD 21388-1 | Acoustics – Hearing aid fitting management – Part 1: General framework | Comments on CD | 02/05/2017 | No |
| ISO/FDIS 1996-2 (Ed 3) | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels | Technical content of FDIS | 24/04/2017 | Abstain |
| ISO/CD 9053 | Acoustics — Materials for acoustical applications — Determination of airflow resistance | Circulation as DIS | 19/04/2017 | Approve |
| ISO/DIS 4869-6 | Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs | Technical content of DIS | 18/04/2017 | Abstain |
| ISO/NP 21388-2 | Acoustics — Hearing aid fitting management — Part 2: Terminology | New work item proposal | 18/04/2017 | Abstain |
| ISO 11200:2014/DAmd 1 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Amendment 1 | Technical content of DIS | 13/04/2017 | Approve |
| ISO/FDIS 12354-4 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside | Technical content of FDIS | 20/03/2017 | Approve |
| ISO/FDIS 12354-3 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound | Technical content of FDIS | 20/03/2017 | Approve |
| ISO/FDIS 12354-2 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms | Technical content of FDIS | 20/03/2017 | Approve |
| ISO/FDIS 12354-1 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms | Technical content of FDIS | 20/03/2017 | Approve |
| ISO/DIS 3822-3 (Ed 3) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances | Technical content of DIS | 23/03/2017 | Abstain |
| ISO/DIS 389-1 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones | Technical content of DIS | 14/03/2017 | Approve |
| ISO 9052-1:1989 (vers 5) | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings | Systematic review | 06/03/2016 | Confirm |
| ISO 17624:2004 (vers 3) | Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens | Systematic review | 06/03/2016 | Abstain |
| ISO 13472-1:2002 (vers 3) | Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method | Systematic review | 06/03/2016 | Abstain |
| ISO 11957:1996 (vers 4) | Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements | Systematic review | 06/03/2016 | Abstain |
| ISO 11820:1996 (vers 4) | Acoustics — Measurements on silencers in situ | Systematic review | 06/03/2016 | Confirm |
| ISO 11689:1996 (vers 4) | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment | Systematic review | 06/03/2016 | Abstain |
| ISO 10846-3:2002 (vers 3) | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion | Systematic review | 06/03/2016 | Abstain |
| ISO 9613-2:1996 (vers 4 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation | Systematic review | 06/03/2016 | Confirm |
| ISO 7574-4:1985 (vers 5) | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines | Systematic review | 06/03/2016 | Abstain |
| ISO 7574-3:1985 (vers 5) | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 3: Simple (transition) method for stated values for batches of machines | Systematic review | 06/03/2016 | Abstain |
| ISO 7574-2:1985 (vers 5) | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines | Systematic review | 06/03/2016 | Abstain |
| ISO 7574-1:1985 (vers 5) | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions | Systematic review | 06/03/2016 | Abstain |
| ISO 5129:2001 (Ed 3, vers 3) | Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight | Systematic review | 06/03/2016 | Abstain |
| ISO 3745:2012 (Ed 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms | Systematic review | 06/03/2016 | Confirm |
| ISO 28961:2012 | Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions | Systematic review | 06/03/2016 | Confirm |
| ISO 8253-3:2012 (Ed 2) | Acoustics — Audiometric test methods — Part 3: Speech audiometry | Systematic review | 06/03/2016 | Confirm |
| ISO 389-8:2004 (vers 3) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones | Systematic review | 06/03/2016 | Abstain |
| ISO/CD 20189-1 | Acoustics — Screens furniture and single objects intended for interior use — Part 1: Rating of sound absorption and sound reduction of elements based on laboratory measurements | Circulation as DIS | 03/03/2017 | Approve |
| Guide 2 – Draft for Ed 2 | Policy on treatment of measurement uncertainty in standards prepared by ISO/TC 43/SC 1 | Publication of Guide | 01/03/2017 | Yes |
| ISO/FDIS 26101 (Ed 2) | Acoustics — Test methods for the qualification of free-field environments | Technical content of FDIS | 17/02/2017 | Approve |
| ISO 3745:2012/FDAmd 1 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1 | Technical content of FDIS | 17/02/2017 | Approve |
| ISO/CD 19488-2 | Acoustics – Acoustic classification of dwellings | Circulation as DIS | 13/02/2017 | Yes |
| ISO/TC 43/SC 1/WG 60 | Method for transposition of dynamic forces generated by an active component from a test bench to a vehicle | Establish new WG | 24/01/2017 | Yes |
| ISO/FDIS 10140-4 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Change from 36 to 48 month track | 21/01/2017 | Yes |
| ISO 17201-1:2005 | Acoustics – Noise from shooting ranges – Part 1: Determination of muzzle blast by measurement | Skip CD and proceed to DIS | 05/01/2017 | Yes |
| ISO/CD 11654 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption | Circulation as DIS | 02/01/2017 | Approve |
| ISO/FDIS 11819-2 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method | Technical content of FDIS | 15/12/2016 | Approve |
| ISO/TC 43/SC 2 | Building acoustics | Appoint V Wittstock as Chair | 15/12/2016 | Yes |
| ISO/FDIS 7029 (Ed 3) | Acoustics — Statistical distribution of hearing thresholds related to age and gender | Technical content of FDIS | 12/12/2016 | Approve |
| ISO 10534-1:1996 (vers 4) | Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 1: Method using standing wave ratio | Systematic review | 05/12/2016 | Confirm |
| ISO 3382-2:2008 (vers 2) | Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms | Systematic review | 05/12/2016 | Confirm |
| ISO/TS 15666:2003 (vers 3) | Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys | Systematic review | 05/12/2016 | Confirm |
| ISO 15664:2001 (vers 3) | Acoustics — Noise control design procedures for open plant | Systematic review | 05/12/2016 | Abstain |
| ISO 14257:2001 (vers 3) | Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance | Systematic review | 05/12/2016 | Abstain |
| ISO/TS 13475-2:2000 (vers 3) | Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities | Systematic review | 05/12/2016 | Abstain |
| ISO 13475-1:1999 (vers 3) | Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities | Systematic review | 05/12/2016 | Abstain |
| ISO/PAS 11819-4:2013 | Acoustics — Method for measuring the influence of road surfaces on traffic noise — Part 4: SPB method using backing board | Systematic review | 05/12/2016 | Abstain |
| ISO 11690-2:1996 (vers 4) | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures | Systematic review | 05/12/2016 | Abstain |
| ISO 11690-1:1996 (vers 4) | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies | Systematic review | 05/12/2016 | Abstain |
| ISO 11205:2003 (vers 2) | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity | Systematic review | 05/12/2016 | Abstain |
| ISO 11203:1995 (vers 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level | Systematic review | 05/12/2016 | Abstain |
| ISO 10846-5:2008 (vers 2) | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion | Systematic review | 05/12/2016 | Abstain |
| ISO 10846-2:2008 (Ed 2, vers 2) | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion | Systematic review | 05/12/2016 | Abstain |
| ISO 10846-1:2008 (Ed 2, vers 2) | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines | Systematic review | 05/12/2016 | Abstain |
| ISO 10302-2:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements | Systematic review | 05/12/2016 | Abstain |
| ISO 10302-1:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement | Systematic review | 05/12/2016 | Confirm |
| ISO 9611:1996 (vers 4) | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted | Systematic review | 05/12/2016 | Abstain |
| ISO 8297:1994 (vers 4) | Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method | Systematic review | 05/12/2016 | Abstain |
| ISO/TS 7849-1:2009 (vers 2) | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor | Systematic review | 05/12/2016 | Abstain |
| ISO 7196:1995 (vers 4) | Acoustics — Frequency-weighting characteristic for infrasound measurements | Systematic review | 05/12/2016 | Confirm |
| ISO 5130:2007 (Ed 2, vers 2) | Acoustics — Measurements of sound pressure level emitted by stationary road vehicles | Systematic review | 05/12/2016 | Confirm |
| ISO/TS 4869-5:2006 (vers 3) | Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects | Systematic review | 05/12/2016 | Confirm |
| ISO 4869-3:2007 (vers 2) | Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture | Systematic review | 05/12/2016 | Confirm |
| ISO 2923:1996 (Ed 2, vers 4) | Acoustics — Measurement of noise on board vessels | Systematic review | 05/12/2016 | Abstain |
| ISO 2922:2000 (Ed 2, vers 3) | Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours | Systematic review | 05/12/2016 | Confirm |
| ISO 16:1975 (vers 5) | Acoustics — Standard tuning frequency (Standard musical pitch) | Systematic review | 05/12/2016 | Confirm |
| ISO/DIS 10848-1 (Ed 2) | Acoustics – Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document | Technical content of DIS | 27/11/2016 | Approve |
| ISO/DIS 10848-2 (Ed 2) | Acoustics – Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence | Technical content of DIS | 27/11/2016 | Approve |
| ISO/DIS 10848-3 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence | Technical content of DIS | 27/11/2016 | Approve |
| ISO/DIS 10848-4 (Ed 2) | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element | Technical content of DIS | 27/11/2016 | Approve |
| ISO/NP 21955 | Vehicles — Experimental method for transposition of dynamic forces generated by an active component from a test bench to a vehicle | New work item proposal | 25/11/2016 | Abstain |
| ISO/NP TR 17534-4 | ISO/TR 17534-4 Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for quality assured implementation of CNOSSOS EU calculation methods in software according to ISO 17534-1 | New work item proposal | 19/10/2016 | Approve |
| ISO/CD 13471-1 | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method | Publication of DTS | 19/10/2016 | Approve |
| ISO/FDIS 10140-4 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Technical content of FDIS | 05/10/2016 | Approve |
| ISO 3822-3 | Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 3: Mounting and operating conditions for in-line valves and appliances | Skip CD stage | 04/10/2016 | Abstain |
| ISO/TC 43/SC 2/WG 27 | Indoor acoustic environment | Appoint C Demanet as convenor | 27/09/2016 | Yes |
| ISO/TS 13473-4:2008 | Characterization of pavement texture by use of surface profiles – Part 4: Spectral analysis of surface profiles | Abandon revision | 01/09/2016 | Yes |
| ISO/DTS 11819-3 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres | Publication of specification | 31/08/2016 | Approve |
| ISO 16283-1:2014/DAmd 1 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation — Amendment 1 | Technical content of DAmd | 29/08/2016 | Approve |
| Guide 1 – Draft for Ed 3 | Drafting instrumentation requirements in documents prepared by ISO/TC 43/SC 1 | Publication of guide | 19/08/2016 | Yes |
| ISO 11200:2014/CD Amd 1 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Amendment 1 | Circulation as DIS | 12/08/2016 | Yes |
| ISO/DIS 532-2 (Ed 2) | Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method | Technical content of DIS | 24/07/2016 | Approve |
| ISO/DIS 532-1 | Acoustics — Methods for calculating loudness — Part 1: Zwicker method | Technical content of DIS | 24/07/2016 | Approve |
| ISO/CD 19488 | Acoustics — Acoustic classification scheme for dwellings | Circulation as DIS | 17/07/2016 | Yes with comments |
| ISO/FDIS 10140-1 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products | Technical content of FDIS | 10/07/2016 | Approve with comments |
| ISO/CD 12913-2 | Acoustics — Soundscape — Part 2: Data collection | Circulation as DIS | 10/07/2016 | Abstain |
| ISO 389-7:2005/FDAmd 1 | Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions | Technical content of FDAmd | 07/06/2016 | Approve |
| ISO/FDIS 362-3 | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories | Technical content of FDIS | 21/05/2016 | Abstain |
| ISO/NP 17201-6 | Acoustics – Noise from shooting ranges – Part 6: Measurement of noise exposure of shooter, observer or instructor for hearing protection | New work item proposal | 23/05/2016 | Abstain |
| ISO/NP 13471-1 | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method | New work item proposal | 18/05/2016 | Approve |
| NWIP ISO/TS 11819-3 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres | New work item proposal | 03/05/2016 | Approve |
| ISO/DIS 12354-4 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside | Technical content of DIS | 28/04/2016 | Approve |
| ISO/DIS 12354-3 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound | Technical content of DIS | 28/04/2016 | Approve |
| ISO/DIS 12354-2 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms | Technical content of DIS | 28/04/2016 | Approve |
| ISO/DIS 12354-1 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between | Technical content of DIS | 28/04/2016 | Approve |
| ISO/TC 43 | Acoustics – Hearing aid fitting management – Part 1: General framework | New work item proposal | 07/04/2016 | Abstain |
| ISO 3822-1:1999 (Ed 3, vers 3) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement | Systematic review | 15/03/2016 | Abstain |
| ISO 3822-2:1995 (Ed 2, vers 4) | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves | Systematic review | 15/03/2016 | Abstain |
| ISO 15186-1:2000 (vers 3) | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements | Systematic review | 15/03/2016 | Confirm |
| ISO/FDIS 16254 | Acoustics — Measurement of sound emitted by road vehicles of category M and N standstill and low speed operation — Engineering method | Technical content of FDIS | 14/03/2016 | Abstain |
| ISO/DIS 10140-4 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Technical content of DIS | 03/03/2016 | Approve |
| ISO 12124:2001 | Acoustics — Procedures for the measurement of real-ear acoustical characteristics of hearing aids | Withdrawal | 01/02/2016 | Approve |
| ISO/FDIS 1996-1 (Ed 3) | Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures | Technical content of FDIS | 27/12/2015 | Approve |
| ISO/CD 389-1 | Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones | Circulation as DIS | 22/12/2015 | Yes |
| ISO 10140-2:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation | Systematic review | 15/12/2015 | Confirm |
| ISO 10140-3:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation | Systematic review | 15/12/2015 | Confirm |
| ISO 10140-5:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment | Systematic review | 15/12/2015 | Confirm |
| ISO/DIS 11819-2.2 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method | Technical content of DIS | 01/12/2015 | Approve with comments |
| ISO/FDIS 16283-3 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation | Technical content of FDIS | 01/12/2015 | Approve |
| ISO/FDIS 389-3 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators | Technical content of FDIS | 01/12/2015 | Approve |
| ISO/FDIS 6926 (Ed 3) | Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | Technical content of FDIS | 24/11/2015 | Abstain |
| ISO 15712-1 to -4 | Building Acoustics — Estimation of acoustic performance of buildings from the performance of elements | Revision with EN 12354 led by CEN and renumber to ISO 12354 | 14/11/2015 | Yes |
| ISO 12124 | Acoustics – Procedures for the measurement of real-ear acoustical characteristics of hearing aids | Withdraw when replaced by IEC 61669 | 01/11/2015 | Yes |
| ISO/CD 3740 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of sound power levels | Circulation as DIS | 09/09/2015 | Yes |
| ISO/DIS 1996-2 (Ed 3) | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels | Technical content of DIS | 02/09/2015 | Abstain |
| ISO 389-7:2005/DAmd 1 | Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions | Technical content of DIS | 14/08/2015 | Approve |
| ISO/DIS 7029 (Ed 3) | Acoustics – Statistical distribution of hearing thresholds related to age and gender | Technical content of DIS | 13/08/2015 | Approve with comments |
| ISO 3743-2 | Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms | Amendment to proceed as FDIS | 15/07/2015 | Yes |
| ISO/TC 43/SC 2/WG57 | In-situ measurements of blocked forces | Establish new working group | 28/06/2015 | Yes |
| ISO/PWI 18484 | Acoustics — Indoor acoustic environment | New work item proposal | 18/06/2015 | Disapprove |
| ISO/NP 20189-1 | Acoustics — Screens furniture and single objects intended for interior use — Part 1: Rating of sound absorption and sound reduction of elements based on laboratory measurements | New work item proposal | 17/06/2015 | Approve |
| ISO 8253-1:2010 (Ed 2) | Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry | Systematic review | 15/06/2015 | Confirm |
| ISO 389-6:2007 (vers 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 6: Reference threshold of hearing for test signals of short duration | Systematic review | 15/06/2015 | Confirm |
| ISO 389-4:1994 (vers 4) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 4: Reference levels for narrow-band masking noise | Systematic review | 15/06/2015 | Confirm |
| ISO 3741:2010 (Ed 4) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms | Systematic review | 15/06/2015 | Confirm |
| ISO 3743-1:2010 (Ed 2) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room | Systematic review | 15/06/2015 | Abstain |
| ISO 3744:2010 (Ed 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane | Systematic review | 15/06/2015 | Confirm |
| ISO 3746:2010 (Ed 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane | Systematic review | 15/06/2015 | Abstain |
| ISO 3747:2010 (Ed 3) | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment | Systematic review | 15/06/2015 | Abstain |
| ISO 7779:2010 (Ed 3) | Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment | Systematic review | 15/06/2015 | Abstain |
| ISO 9613-1:1993 (vers 4) | Acoustics — Attenuation of sound during propagation outdoors — Part 1: Calculation of the absorption of sound by the atmosphere | Systematic review | 15/06/2015 | Confirm |
| ISO 11201:2010 (Ed 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections | Systematic review | 15/06/2015 | Abstain |
| ISO 11202:2010 (Ed 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections | Systematic review | 15/06/2015 | Abstain |
| ISO 11204:2010 (Ed 2) | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections | Systematic review | 15/06/2015 | Abstain |
| ISO 11546-1:1995 (vers 4) | Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) | Systematic review | 15/06/2015 | Abstain |
| ISO 11546-2:1995 (vers 4) | Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) | Systematic review | 15/06/2015 | Abstain |
| ISO 11691:1995 (vers 4) | Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method | Systematic review | 15/06/2015 | Abstain |
| ISO 15667:2000 (vers 3) | Acoustics — Guidelines for noise control by enclosures and cabins | Systematic review | 15/06/2015 | Abstain |
| ISO 17201-3:2010 | Acoustics — Noise from shooting ranges — Part 3: Guidelines for sound propagation calculations | Systematic review | 15/06/2015 | Abstain |
| ISO 17201-5:2010 | Acoustics — Noise from shooting ranges — Part 5: Noise management | Systematic review | 15/06/2015 | Abstain |
| ISO/CD 10140-4.2 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Circulate as DIS | 26/05/2015 | Yes |
| ISO/DIS 9296.2 (Ed 2) | Acoustics — Declared noise emission values of information technology and telecommunications equipment | Technical content of DIS | 23/05/2015 | Abstain |
| ISO 3745:2012/DAmd 1 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1 | Technical content of draft | 19/05/2015 | Abstain |
| ISO 26101:2012/DAmd 1 | Acoustics — Test methods for the qualification of free-field environments — Amendment 1 | Technical content of draft amendment | 19/05/2015 | Abstain |
| ISO/DIS 10140-1 (Ed 2) | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products | Technical content of draft | 04/05/2015 | Approve |
| ISO/DIS 4869-2 (Ed 2) | Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn | Technical content of DIS | 04/05/2015 | Abstain |
| ISO/DIS 4869-1 (Ed 2) | Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation | Technical content of DIS | 15/04/2015 | Approve with comments |
| ISO/DIS 16254.2 | Acoustics — Measurement of sound emitted by road vehicles of category M and N standstill and low speed operation — Engineering method | Technical content of DIS | 11/04/2015 | Abstain |
| ISO/PWI 354 | Acoustics – Measurement of sound absorption in a reverberation room | Reinstallation of ISO/PWI 354 | 31/03/2015 | Yes |
| ISO/CD 532-2.2 | Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method | Circulate as DIS | 31/03/2015 | Abstain |
| ISO/FDIS 1683 (Ed 3) | Acoustics — Preferred reference values for acoustical and vibratory levels | Technical content of FDIS | 29/03/2015 | Approve |
| ISO/FDIS 16283-2 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | Technical content of FDIS | 29/04/2015 | Approve with comments |
| ISO/CD 13473-1 | Characterization of pavement texture by use of surface profiles — Part 1: Determination of mean profile depth | Circulate draft as a DIS | 17/03/2015 | Abstain |
| ISO 10140-3:2010/FDAmd 1 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 1 | Technical content of FDIS | 15/03/2015 | Abstain |
| ISO/PWI 12999-2 | Acoustics – Determination and application of measurement uncertainties in building acoustics – Part 2: Sound Absorption | Reinstallation of PWI | 13/03/2015 | Yes |
| ISO/DIS 389-3 (Ed 2) | Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators | Technical content of DIS | 09/03/2015 | Abstain |
| TC43/SC1/WG40 | Impulse sound propagation for environmental noise assessment | Disband WG40 | 15/02/2015 | Yes |
| ISO/CD 10140-4 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements | Circulate draft as DIS | 13/02/2015 | Yes |